Cecotec Bolero Dresscode 8300 Inverter Maxx A handleiding
Handleiding
Je bekijkt pagina 45 van 137

Bolero DressCode 8300_9300 Inverter Max ABolero DressCode 8300_9300 Inverter Max A
8988
ENGLISH ENGLISH
Product Bolero DressCode 8300
Inverter Max A
Bolero DressCode 9300
Inverter Max A
Reference: 02792
02794
QR code
5. CLEANING AND MAINTENANCE
Warning
- Before cleaning or repair tasks, unplug the appliance from the mains and close the water
tap.
- Proper maintenance on the washing machine can extend its working life. The surface can
be cleaned with diluted non-abrasive, neutral detergents if necessary. If there is any water
overow, use a cloth to wipe it o immediately.
- Do not use abrasive cleaners or scouring pads to clean the device.
Cleaning the drum
- The rusts left inside the drum by the metal articles shall be removed immediately with
chlorine-free detergents.
- Do not use steel wool.
Note
Do not put laundry in the washing machine during the drum cleaning.
Cleaning the door seals and glass
- Wipe the glass and seal after each wash to remove lint and stains. If lint builds up it can
cause leaks. Fig. 21
- Remove any coins, buttons and other objects from the seal after each wash.
Cleaning the inlet lter
Note
The inlet lter must be cleaned when there is little water.
Washing the tap lter. Fig. 22
1. Close the water supply tap.
2. Remove the water supply hose from the tap.
3. Clean the lter with a soft brush.
Usage counter
- Unplug the equipment for 10 seconds and plug it in again.
- Switch on the machine and wait for 10 seconds, press "Delay" and "Drum Clean" on the
control panel simultaneously and continuously for about 5 seconds until the display shows
digits, the value indicates the usage times of the machine.
- Repeat step 1 again to resume normal operation.
Tips for use
- After a programme is completed, wait for two minutes before opening the door.
- Check whether the water inside the drum has been drained before opening its door. Do not
open the door if there is any water.
- Do not wash only one piece of clothes or garment, as these could cause great unbalance.
Always introduce at least 3 or 4 clothes so that draining can be done smoothly.
- The information given for the programmes dierent to the eco 40-60 programme are just
indicative.
- The eco 40-60 programme can clean normally soiled cotton clothes declared as washable
at 40ºC or 60ºC, together in the same cycle. This programme is used to assess compliance
with EU eco-design legislation.
- The times indicated for each programme match the length with standard loads and
temperatures. Other loads and temperatures will need dierent programme length.
- The most ecient programmes in terms of energy consumption are generally those that
are carried out at lower temperatures and longer length.
- Load the washing machine to the quantity estimated for each programme, this will help
you save energy and water.
- The length, and energy and water consumption of each programme may vary according
to the weight and type of laundry, the additional functions active, water, and ambient
temperature.
- It is recommended the use of liquid detergent for washing programmes at low temperature.
You can vary the quantity of detergent according to the quantity of laundry and its soiling
level. Follow the detergent manufacturer recommendations for the quantity of detergent
you must use.
- You can nd more information on this model by scanning the QR code of the reference of
your product (you will also nd the energy label).
Bekijk gratis de handleiding van Cecotec Bolero Dresscode 8300 Inverter Maxx A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cecotec |
| Model | Bolero Dresscode 8300 Inverter Maxx A |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 15604 MB |







