Cecotec Bolero Dresscode 8300 Inverter Maxx A handleiding

Wasmachine

Cecotec

137 pagina's

PDF beschikbaar

Handleiding

Bolero DressCode 8300_9300 Inverter Max ABolero DressCode 8300_9300 Inverter Max A

8786

ENGLISH ENGLISH

Pre-Wash

1. Select a programme.

2. Press "Function" button and select "Prewash" to make the appliance perform an additional

wash before the main wash cycle starts, to increase the washing performance ("Prewash"

icon will light up).

Note: detergent must be added to compartment I.

Cleaning the drum

- After the machine runs a preset period of wash cycles, the Drum Clean light will ash at

the end of the last programme, reminding you to run the programme as follows:

1. Empty the drum and close the door.

2. Press “Drum Clean”.

3. Press “Start/Pause”.

- The number of wash cycles will count back from 0 when the drum cleaning programme is

nished.

- If you want to remove the drum cleaning warning:

- Press and hold the "Drum Clean" button for about 3 seconds, the warning will be cancelled,

and the wash cycles will restart counting from 0.

Temperature (6)

When necessary, the wash temperature can be adjusted by pressing the button and following

the sequence below: Cold-20ºC-40ºC-60ºC-90ºC.

Mute Mode

1. Select a programme.

2. Press and hold the Speed button for approx. 3 seconds. No beeps shall be heard.

3. To reactivate the sound, press the Speed button again for about 3 seconds.

Note: the setting will be saved until next restart.

Child Lock function

- Press the Temp and Function buttons at the same time for about 3 seconds.

Please note.

- When the child lock is activated and the washing programme starts, the display will

alternately show "CL" and the remaining time of the washing cycle.

- Pressing any button will cause the indicator to ash.

- When the wash cycle is nished, "Cl" and "END" alternate on the display.

- Press and hold the two buttons Temp and Function to unlock the function.

- This function locks all buttons except the Start/Pause button and the child lock button

itself.

- Deactivate the child lock function before selecting a programme and starting washing.

Bulky/Bedlinen 40 1000 1000 Extra rinse and

delayed start.

Rinse&Spin - 1000 1000 Delay Start

Drum Clean 90 - - Delayed Start/

Prewash/Extra Rinse

Please note:

- The table shows the cycles’ options and how they can be adjusted.

- It also shows if some settings are not compatible with some cycles.

Selectable options

Fig. 20

A. Display

B. Child Lock icon

C. Door Lock icon

D. Delay Start icon

E. Temperature icons (Temp)

F. PreWash icons (Prewash)

G. Extra Rinse icon (Extra Rinse)

OPTIONS

Delay Start

- To set the Delay start function:

1. Select a programme.

2. Press the Delay button to choose the time (the delaying time is 0-24 H.).

3. Press Start/Pause to activate the delay operation.

- To cancel the "Delayed Start" function, press the button before starting the programme

until the display shows 0H. If the programme has already started, switch the device o and

on again and select a new programme.

Extra rinse

1. Select a programme.

2. Press "Function" button and select "Extra Rinse" to make the machine perform an extra

nal rinse ("Extra Rinse" icon will light up).

Spin speed

1. Select a programme.

2. Press this "Speed" button to select the desired speed, following the next cycle per press:

- 1200: 0-400-600-800-1000-1200

- 1400: 0-400-600-800-1000-1200-1400

Bekijk gratis de handleiding van Cecotec Bolero Dresscode 8300 Inverter Maxx A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.