Cecotec Bolero CoolMarket Combi 335 E Handleiding (304 Pagina's)

Handleiding

/ 304

Je bekijkt pagina 103 van 304

BOLERO COOLMARKET COMBI 335 E

103

ENGLISH

- If the refrigerator is placed near heat sources or in direct sunlight, cooling efficiency will be

reduced, resulting in additional power consumption.

- Adjust the front feet to place the refrigerator in an upright position. If it is not properly

levelled, noise and vibrations may occur.

- If the refrigerator is placed on a carpet or other soft surfaces, place a protective board

underneath to prevent tipping and potential injury.

- Make sure that the refrigerator is properly connected to an earthed socket; otherwise, an

electric shock may occur.

- Do not place the refrigerator in wet or humid places.

- During transport, prevent the refrigerator door from contacting any objects that could

damage it, and ensure the tilt angle does not exceed 45°.

- Place the refrigerator in a well-ventilated, dry place away from direct sunlight. Also avoid

placing it near heat sources.

- Do not expose the refrigerator to low temperatures.

Levelling the refrigerator

- Turn the bottom levelling feet clockwise to raise the refrigerator.

- Turn the bottom levelling feet counterclockwise to lower the refrigerator.

Reversing the door opening direction

Tools needed:

- Crosshead screwdriver

- Flat-head screwdriver

- Hexagonal spanner

- Make sure the appliance is unplugged and empty.

- To remove the door, tilt the appliance backwards if necessary. Rest the appliance on a solid

surface so it does not slip during the door reversing process.

Note: Keep all removed parts for door reinstallation.

- Do not lay the appliance flat, as this may damage the cooling system.

- It is recommended to have two people handle the appliance during assembly.

1. Remove the four screws from the top cover and then lift it off. Fig. 2

2. Unscrew the upper hinge, then remove the upper door and place it on a soft pad to prevent

scratches. Fig. 3

3. Remove the pin with a screwdriver and flip the hinge bracket. Then refit the pin to the hinge

bracket. Fig. 4

4. Unscrew the middle hinge. Then lift the lower door and place it on a soft pad to prevent

scratches. Fig. 5

5. Move the hinge hole covers from the left side to the right side. Fig. 6

/ 304

Bekijk gratis de handleiding van Cecotec Bolero CoolMarket Combi 335 E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.