Handleiding
Je bekijkt pagina 104 van 304

BOLERO COOLMARKET COMBI 335 E
104
ENGLISH
6. Unscrew the lower hinge. Then remove the adjustable feet from both sides. Fig. 7
7. Unscrew and remove the lower hinge pin, turn the bracket over and refit it. Fig. 8
8. Reassemble the bracket with the lower hinge pin. Replace both adjustable feet. Place the
lower door in the assembling position. Fig. 9
9. Make the middle hinge reverse direction 180º, then refit it to the left position. Place the
middle hinge pin into the upper hole of the lower door and tighten the bolts. Fig. 10
10. Refit the upper door. Ensure the door is aligned horizontally and vertically so that the seals
are closed on all sides before fully tightening the upper hinge. Then insert the hinge and
screw it to the top of the appliance. Fig. 11
11. Put the top cover back in place and screw it. Fig. 12
4. OPERATION
Control panel
Fig. 13
The different functions of the refrigerator are shown below:
Setting and switching off the refrigerator compartment temperature
The refrigerator temperature can be adjusted between 2 °C and 9 °C. Each time you press the
button, the temperature will increase by 1 °C. When it reaches the maximum
temperature (9 ºC), pressing the button will switch off the setting and the display will show
“--”. Pressing the button again will automatically return to the minimum temperature (2 °C).
Repeat this process.
Setting the Freshness Flex Hub refrigerator drawer temperature
The temperature of the drawer can be adjusted using the temperature knob.
If you slide the humidity regulator to the right, more gaps will be exposed, and the drawer will
have a lower humidity level.
If you slide the humidity regulator to the left, less gaps will be exposed, and the drawer will
have a higher humidity level.
Setting the Humidity Flex Hub refrigerator drawer humidity
The humidity regulator of the drawer is designed to keep moisture steady and the vegetable
freshness.
If you slide the humidity regulator to the right, more gaps will be exposed, and the drawer will
have a lower humidity level.
If you slide the humidity regulator to the left, less gaps will be exposed, and the drawer will
have a higher humidity level.
Bekijk gratis de handleiding van Cecotec Bolero CoolMarket Combi 335 E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cecotec |
| Model | Bolero CoolMarket Combi 335 E |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 25279 MB |







