Handleiding
Je bekijkt pagina 102 van 304

BOLERO COOLMARKET COMBI 335 E
102
ENGLISH
use a solution of baking soda and warm water and then dry the inside of the refrigerator
thoroughly. The refrigerator may give off a peculiar smell when it is opened for the first
time. This smell will disappear as the appliance cools down.
3. INSTALLATION
Before using the refrigerator
Before starting the refrigerator, check the following:
1. Make sure that the interior is dry and air can circulate freely at the rear.
2. Clean the interior according to the instructions in the “Cleaning and maintenance” section.
3. Connect the refrigerator’s power cable to a suitable socket. When opening the freezer
door, the interior lights should turn on.
4. You will hear a sound when the compressor starts running; this is normal. The liquid
and gases sealed within the refrigeration system may also produce noise, whether the
compressor is running or not. This is perfectly normal.
5. The front and side edges of the refrigerator may feel warm. This is designed to prevent
condensation and is part of normal operation.
Placement and installation
Installation preparation
- Never install the appliance near heat sources, such as heaters or cookers, or in damp
places.
- At least two people are required to transport and install the appliance safely. When lifting
the appliance, edges may be sharp. Use appropriate protective equipment during transport
and installation.
- To ensure that the refrigerator is level, adjust the front adjustable feet to the desired
height.
- Make sure that the cooling system at the rear of the appliance does not touch the wall. The
greater the gap, the better.
- The appliance must be installed in a well-ventilated area. Be sure to leave enough space
above the appliance for air outflow and to maintain an adequate clearance between the
rear side and the wall.
- Place the refrigerator in a stable place where vibrations do not occur. In earthquake-prone
areas, secure the refrigerator to prevent it from falling and causing accidents.
- If insufficient space is left around the refrigerator, or if objects are placed on top or beside
it, heat dissipation may be affected, leading to unnecessary power consumption.
- Contact between the rear surface of the appliance and the wall may cause vibrations and
noise.
- If the refrigerator is placed too close to a wall or other objects, they could be damaged due
to heat dissipation.
Bekijk gratis de handleiding van Cecotec Bolero CoolMarket Combi 335 E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cecotec |
| Model | Bolero CoolMarket Combi 335 E |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 25279 MB |







