Cecotec Bolero Aguazero 6700 B handleiding

Vaatwasser

Cecotec

119 pagina's

PDF beschikbaar

Handleiding

Bolero Aguazero 6700 B

Bolero Aguazero 6700 Inox B

Bolero Aguazero 6700 Dark B

Bolero Aguazero 6700 B

Bolero Aguazero 6700 Inox B

Bolero Aguazero 6700 Dark B

6766

ENGLISH ENGLISH

For safety reasons, remove the fuse, switch o the circuit breaker or disconnect the dishwasher

before installation.

The plug must be inserted into a properly installed and earthed socket (in accordance with

local regulations and standards).

Connect the dishwasher to a protected and adequately rated power supply circuit to prevent

electrical overload.

Final checks

1. Connect the dishwasher to the electric circuit.

2. Open the water supply.

3. Make sure that the dishwasher door can be opened and closed smoothly.

- If necessary, re-level the dishwasher.

- If the door cannot close, check that the baskets are level (Fig.19).

- Make sure that you have removed all packaging material.

1. Switch on the dishwasher and run the Intensive 65 ºC programme to check that it is

working properly.

2. Check hoses for leaks.

3. Check that you have removed all packaging material and the stickers on the dishwasher.

4. OPERATION

- Read the safety instructions before using the appliance.

- Follow the instructions when placing items in the dishwasher to ensure eective cleaning.

- Remove insoluble substances such as bones, toothpicks and pieces of paper when

inserting tableware and cutlery.

Loading the dishwasher

- Only load dishwasher-safe items.

- Remove solid debris from the tableware before putting it in the dishwasher.

- Place deep items at an angle to speed up the drying process.

Tip:

Do not put thermolabile items (which may deteriorate due to high temperatures), or items

decorated with metal in the dishwasher.

Quick start guide

1. Load the tableware in the dishwasher

Remove excess food, bones and any other hard, insoluble residues from the tableware.

Remove the two baskets and load the tableware according to the instructions in this manual.

To perform the connection, follow the steps below:

1. Check the rubber seal on both sides of the hose. Insert the rubber seal into the threaded

connection of the hose to prevent leakage (Fig. 15).

Fig. 15 key:

1. Rubber seal.

2. Hose.

2. Connect the hose to the tap by hand and then tighten it with pliers or a suitable tool (not

supplied). Tighten by about 2/3 of a turn (Fig. 16).

3. Then turn on the tap to remove any dirt that may have accumulated in the hose. Pour the

water into a container and check that the water is at room temperature (Fig. 17).

4. Connect the hose to the water supply valve at the rear of the dishwasher. You can connect

it by hand and then tighten it securely but carefully using pliers or a suitable tool (not

included). Fig. 19

5. Open the tap to check for water leaks. If you notice water dripping, repeat steps 1-4.

Connecting the power supply cable

- Connect the dishwasher to an earthed socket outlet in accordance with the current

electrical specications and regulations in your country and protect it with a circuit breaker

or fuse of at least 15 Ampere.

- The two-wire system with earthing should be adopted for wiring.

- Try not to place the power cable behind the dishwasher, as it could get trapped and

damaged. It is advisable to plug the appliance into a socket that is 1.2 metres from its side.

Warning:

- Before plugging the appliance into the mains, make sure that:

- The plug is earthed and complies with current regulations.

- The plug can withstand the maximum load of the appliance, which is indicated on the

product rating plate.

- The supply voltage is within the values indicated on the rating plate.

- The socket is compatible with the plug of the appliance. If not, have the socket replaced by

an authorised technician. Do not use an extension lead or multiple sockets.

- Once the appliance has been installed, the power cable and the socket must be easily

accessible.

- The cable must not be bent or compressed.

- If the power cable is damaged, it must be replaced by the ocial Cecotec Technical Support

Service to avoid any potential risk.

- Cecotec will not be held responsible for any incidents that occur if these rules are not

followed.

Bekijk gratis de handleiding van Cecotec Bolero Aguazero 6700 B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.