Cecotec BelleCouture OverLock handleiding
Handleiding
Je bekijkt pagina 67 van 208

BELLECOUTURE OVERLOCK
67
ENGLISH
Loosen the screw (1) and adjust the thread guide (2) so that only one thread of the upper fabric is trapped by the needle when the needle
penetrates. Always sew a test seam in a piece of scrap fabric.
Gimping foot
This presser foot is used for sewing gimp threads (twine, synthetic threads) up to 1 mm thick. Creates a wavy hem nish on delicate fabrics. It
can be used, for example, for evening dresses and wedding dresses or curtains.
Setting the machine
Adjust the machine for folded 3-thread rolled hems.
Operation
Raise the needle to its highest position and insert the presser foot. Insert the gimp thread into the thread guide
(1) and pull it through the hole (2) to the side thread guide (3). Then, pass the thread under the thread guides (4)
and (5) until it protrudes approx. 10 cm from the back. Attach the gimp thread with a few stitches, place the fabric
under the presser foot and continue sewing (the fabric should be right side up). Carry out a sewing test.
Note: the wave eect can be accentuated by adjusting the dierential feed to 0.5 and cutting the fabric diagonally
to the yarn.
Elastic presser foot
This presser foot is used for sewing elastic ribbon. In the same operation, the fabric is cut and sewn, and is also gathered by means of the elastic
ribbon.
Setting the machine
Set your machine to perform 4-thread overlock seam. The width of the seam is determined by the width of the elastic ribbon.
Operation
Raise the needle to its highest position and insert the elastic presser foot. Loosen the screw (1) so that part 3
opens by about 2 mm. Insert the elastic ribbon (4) into the opening (2) and pass it under the presser foot so that
it protrudes about 10 cm behind the presser foot. Finally, retighten screw 1. The tighter the screw is tightened,
the more pressure part 3 exerts on the elastic ribbon and thus the greater the gather eect. Carry out a sewing
test.
Bekijk gratis de handleiding van Cecotec BelleCouture OverLock, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cecotec |
| Model | BelleCouture OverLock |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 92014 MB |
