Cecotec BelleCouture OverLock Handleiding (208 Pagina's)

Handleiding

/ 208

Je bekijkt pagina 66 van 208

BELLECOUTURE OVERLOCK

66

ENGLISH

If the thread of the right needle (green) is too loose, increase the tension of the green thread.

If the lower looper thread (yellow) is too taut, reduce the tension of the yellow thread.

Special accessories

On the following pages you will nd descriptions of all the presser feet that you can use to get the most out of your overlocker.

Blind stitch foot

It is ideal for sewing invisible seams on thick and heavy fabrics. The seam is trimmed, serged and “blind” stitched in a single operation.

Setting the machine

Remove the left needle. Set the machine to 3-thread overlock seam (narrow) and select stitch length 4.

Operation

Raise the needle to its highest position and insert the presser foot. Fold the seam inwards. Then, fold the

seam outwards again, so that the edge protrudes by about 1 cm. Place the seam under the presser foot so

that the folded seam section is under the thread guide (2). The fold (4) must pass along the edge of the

thread guide (2).

/ 208

Bekijk gratis de handleiding van Cecotec BelleCouture OverLock, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.