Casablanca Heritage 59527 handleiding
Handleiding
Je bekijkt pagina 13 van 17
13
Switch Housing Installation
Step 13a. Install two of the three switch housing
screws onto the switch housing adapter plate as
shown in Figure #1.
Step 13b. Thread BLUE and WHITE wires through
the hole in the center of the switch housing plate
and align the two keyholes with the two screws
that were installed on the switch housing. Place the
switch housing plate over the two screws and rotate
it clockwise so that the two screws are holding the
switch housing plate as shown in Figures #2 and
#3.
Step 13c. Align the screw hole on the switch
housing with the screw hole in the switch housing
plate and insert the third screw as shown in Figure
#3. Then tighten all three screws with the provided
screwdriver.
SWITCH HOUSING AND END CAP INSTALLATION
SWITCH HOUSING HARDWARE (not to scale)
Switch Housing Plate
Switch Housing Screws (3)
Adapter Plate
Adapter Plate Screws (3)
End Cap
Cover Plate Screws (2)
Figure #1
Figure #2
SWITCH
HOUSING
PLATE
SWITCH
HOUSING
SCREWS
Figure #3
TIGHTEN 3
SCREWS
SWITCH
HOUSING
SCREWS
Switch Housing
Plate Gasket
Phillips
Screwdriver
Bekijk gratis de handleiding van Casablanca Heritage 59527, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Casablanca |
| Model | Heritage 59527 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 6286 MB |
