Carel iJW handleiding

Niet gecategoriseerd

Carel

104 pagina's

PDF beschikbaar

Handleiding

ENG

iJW +0300103EN rel. 1.1 - 31.03.2025

Index

4.3.4 Programming mode

In actuator/function direct activation mode, pressing PRG enters programming mode, where the unit’s main operating param-

eters can be set.

If wake up navigation mode has been selected, after pressing PRG for 3 s the password needs to be entered (default 22).

If, on the other hand, locked navigation mode has been selected, pressing PRG directly accesses the basic conﬁ guration param-

eters, such as direct commands and active alarms without needing to enter the password (if a User password other than the

default 00 has been set, the password will need to be entered), or the Service parameters (Service password required). To access

the Service parameters, go to the “PSD” menu item (see the table below) and enter the password (default 22).

Notice: the main conﬁ guration parameters are accessed via the user terminal, for basic conﬁ guration of the unit; for ﬁ ne

tuning use Applica, which gives access to all the parameters available for the user proﬁ le.

Parameter categories visible on the user terminal

The menu items available and parameters visible on the user terminal are listed below. The menu branches/parameters protect-

ed by the Service password (default 22) in locked mode are shown in bold italics.

dir (*)

(Direct

functions)

CtL

(Control)

Pro

(Display

probes)

dEF

(Defrost)

HcP

(HACCP)

CnF

(Con gura-

tion)

cMP

(Compressor)

FAn

(Fans)

ALM

(Alarms)

PSd

(***)

ESC

See the fol-

lowing table St /5 d0 rHP Hb c0 F0 A1

rd /6 dI HAn H0 c1 F1 AH/AHA

Sth /cA dP1 HFn GF1 c2 F2 AL/ALA

rdh /cb dt1 ESC GF2 c3 F3 Ad

IS (**) /cc d4 GF ESC Fd Add

r1 /nE d8 bM (****) Fpd rSA

r2 /t1 dd ESC rAL

rn /P1 ESC ESC

/4 /P2

rSC ESC

ESC

Tab. 4.d

(*) The visibility of the direct functions can be set using the corresponding parameters, and depends on whether the functions are available on the controller.

(**) Visible if there is at least one conﬁ guration loaded on the controller (see “Appendix”)

(***) Visible as a menu item only in locked mode.

(****) Corresponds to parameter kbM

Direct functions

Acr. Description Visibility Acr. Description Visibility

BtE Enable Bluetooth™ if present Sd Defrost probe /Fb > 0

CnC Activate continuous cycle cc > 0 SHu Humidity probe /FP > 0

Eco Activate Eco mode Sm Air oﬀ probe /Fa > 0

Fr Firmware version Sr Air on probe /Fc > 0

nFE Enable copy parameters from NFC memory to control-

ler

Tab. 4.e

Bekijk gratis de handleiding van Carel iJW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.