Canon imageCLASS LBP674Cdw II handleiding

Printer

Canon

548 pagina's

PDF beschikbaar

Handleiding

/ 548

Je bekijkt pagina 184 van 548

Select the appropriate prole according to the monitor you are using when printing RGB data. For details about

the settings, see the following:

[RGB Source Prole](P. 364)

[CMYK Simulation Prole]

Select the simulation target when printing CMYK data. The machine converts CMYK data to a device-dependent

CMYK color model based on this simulation. For details about the settings, see the following:

[CMYK Simulation Prole](P. 365)

[Use Grayscale Prole]

Specify whether to convert gray data to CMYK data using the grayscale prole of the machine.

* Even if [On] is selected, data is printed using 1-color black (K) toner, depending on the setting of [Output

Prole], [Pure Black Text] or [Pure Black Graphics].

[Output Prole]

Select the appropriate prole for the print data. For details about the settings, see the following:

[Output Prole](P. 365)

[Matching Method]

Select the element to be prioritized when adjusting the color with [RGB Source Prole]. For details about the

settings, see the following:

[Matching Method](P. 366)

[Composite Overprint]

Specify whether to overprint CMYK data set for overprinting, as composite output.

Specifying [Off] in this setting prints the image as if overprinting were not speciﬁed.

* Overprinting with special colors is not used, even if [On] is speciﬁed here.

[Grayscale Conversion]

Specify the conversion method when printing color data in black and white. For details about the settings, see

the following:

[Grayscale Conversion](P. 367)

[Print Quality]

Adjust the print quality, such as the density and resolution, according to the document and purpose of printing.

[Density]

Adjust the toner density for each color during printing.

For more precise adjustment, you can adjust the levels of the three density areas for each color in [Fine

Adjust].

* When [Toner Save] is set to [On], you cannot adjust the toner density.

[Toner Save]

Specify whether to print while saving toner.

To print after checking the layout and appearance, such as before printing a large job, select [On].

[Gradation]

Specify the processing method used to reproduce gradation.

When you select [High 2], printing is performed with ner gradation than with [High 1].

* This setting is only available when [Resolution] is set to [600 dpi].

[Density Fine Adjustment]

Adjusts the density of ne lines and small text. Adjusts the density when ne lines or small text is faded to

give less faded print.

* Adjusting the density also affects the color balance and objects other than lines and text.

* This setting is only available when [Resolution] is set to [1200 dpi].

[Resolution]

Specify the resolution to be used for print data processing.

To print with a higher resolution, specify [1200 dpi] in this setting.

[Special Smoothing Mode]

Printing

176

/ 548

Bekijk gratis de handleiding van Canon imageCLASS LBP674Cdw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.