Canon imageCLASS LBP674Cdw II handleiding

Printer

Canon

548 pagina's

PDF beschikbaar

Handleiding

/ 548

Je bekijkt pagina 183 van 548

* This is the same setting as [N on 1] on the Memory Media Print settings screen. However, [9 on 1] and [16 on 1]

are only available for [N on 1] on the [Set PDF Details] screen.

[Print Range]

Print all pages, or specify a range of pages to print. When specifying a range of pages, press [Specied Pages], and

enter the starting and ending pages.

[Enlarge/Reduce to Fit Paper Size]

Specify whether to enlarge or reduce the document according to the paper to be used for printing.

* The document is enlarged or reduced while maintaining the aspect ratio.

[Enlarge Print Area]

Specify whether to enlarge the print area to the edge of the paper without providing margins around the paper.

* When [Enlarge Print Area] is set to [On], part of the edge of the printed image may not be printed, or the paper may

be partly smudged.

[Print Comments]

Specify whether to print PDF comments.

When you select [Auto], the document and comments

are printed.

Only comments specied for printing in the PDF le.

[Line Renement]

Specify whether to make the thickness of thin lines in the document uniform.

When you select [On (Slim)], lines are slimmer than with [On], but lines may become too thin or faint.

[Password to Open Document]

When printing a password-protected PDF le, enter the password to open the le.

[Other Settings]

Congure and adjust image quality settings and other detailed print settings.

[Halftones]

Set the printing method when reproducing halftones (the intermediate range between the lighter and darker

areas of an image). For details about the settings, see the following:

[Halftones](P. 360)

[Pure Black Text]

Specify whether to print black text using 1-color black (K) toner.

If you specify [Off] in this setting, documents are printed according to the settings in [Output Prole].

* This applies to black text where the color information is as follows:

● R = G = B = 0%

● C = M = Y = 100%

● C = M = Y = 0%, K = 100%

[Pure Black Graphics]

Set whether to print black graphics (illustrations created in applications) using only the black (K) toner.

When you select [Off], printing is performed according to the [Output Prole] setting.

* This setting applies to black graphics with the following color information:

● R = G = B = 0%

● C = M = Y = 100%

● C = M = Y = 0%, K = 100%

[Black Overprint]

Specify whether overprinting (printing colors on top of each other) is used when black text appears on a color

background or is overlaid on a ﬁgure. For details about the settings, see the following:

[Black Overprint](P. 364)

[RGB Source Prole]

Printing

175

/ 548

Bekijk gratis de handleiding van Canon imageCLASS LBP674Cdw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.