Cambium Networks cnReach N500 Handleiding (253 Pagina's)

Handleiding

/ 253

Je bekijkt pagina 47 van 253

cnReach N500 User Guide System Configuration

phn-4980_001v004 August 2019)

2-14

Radio Menu

The Radio menu contains all configuration parameters associated with the radio / air interface. This

includes physical layer parameters like transmit power and frequency but also network topology and

addressing for the air interface protocols.

Radio/Band Settings (Full Configuration Mode)

This page provides information on the installed radio modules. If you are configuring a dual radio you’ll

see Radio 1 and Radio 2 as shown below. For single radios you will only see Radio 1.

For 900 MHz radios, this page sets whether the unit will be operating in ISM/Unlicensed band or

MAS/Licensed band.

– ISM band (902-928MHz) - Unlicensed- a range of frequencies is used and the radio may

hop between RF channels within the band.

– MAS band (928-960MHz) – Licensed - specific frequencies are used for transmit and

receive and the radio maintains those frequencies at all times.

Once the band is set, the Radio/RF settings page will display only information relevant to the chosen

band.

For 220/450/700 MHz radios there is nothing to set on this page.

Additional information about radio firmware, serial number and regulation region is shown here.

/ 253

Bekijk gratis de handleiding van Cambium Networks cnReach N500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.