Cambium Networks cnReach N500 Handleiding (253 Pagina's)

Handleiding

/ 253

Je bekijkt pagina 48 van 253

cnReach N500 User Guide System Configuration

phn-4980_001v004 August 2019)

2-15

Radio/RF Settings

This section describes the configuration of frequencies, transmit power, hop pattern, and transmit rates.

Note

cnReach radios can be used in full configuration mode or auto-configuration mode. In full

configuration mode, all settings are made on all radios (APs and EPs). In auto-

configuration model, the EP automatically detects many of the air interface settings from

APs beacon signals. This can dramatically simplify the configuration, modification and

maintenance of cnReach networks.

This section refers to the full configuration mode. See the following section which repeats

this information but for those using auto configuration mode.

For new installations, we recommend using auto configuration mode.

Attention

The following radio settings that affect transmission timing must be the SAME in ALL

radios within ALL sub-networks in the system;

- AP/EP Tx Frequency (and for ISM the start/stop and excluded frequencies)

- For ISM, Hop Pattern

- Access Point Transmit Rate

- End Point Transmit Rate(s)

- Max Payload Bytes

- Network Type; PTP or PMP

- Network Radius

/ 253

Bekijk gratis de handleiding van Cambium Networks cnReach N500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.