Cambium Networks cnMatrix EX2010-P Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 39 van 320

L2 Features 39

l

Remove ports from a VLAN range

EX2052-123460(config-vlan-range)# no ports gigabitethernet 0/3,0/4

Troubleshooting VLAN

Useful commands for VLAN troubleshooting:

l

To check the VLAN created in ports' membership:

cnMatrix# show vlan brief

l

To check the operation mode of each interface:

cnMatrix# show vlan port Gigabitethernet 0/2

l

To check the interface status:

cnMatrix# show interface status

l

To check the ingress/egress counters on each interface:

cnMatrix# show interface counters

l

To check the global status for the specified VLAN range:

cnMatrix# show vlan ascending

cnMatrix# show mac-address-table [vlan <vlan-range>]

STP

Feature Overview

The STP feature is a link management protocol that provides path redundancy while preventing

undesirable loops in the network that are created by multiple active paths between stations. The STP

feature enables you to form a loop-free network topology. Depending upon the path cost and the priority

of the ports and bridges, the STP selects a bridge as a root bridge and forms a loop-free logical topology,

which ensures a single path between any two-end stations.

STP in cnMatrix

Standards

The STP functionality is realized in the network using one of the three following STPs:

l

RSTP (802.1w)

l

MSTP (802.1s)

l

PVRST

Scaling Numbers

l

Amaximum of 32PVRST instances can be configured in PVRST mode.

l

A maximum of 8 MSTP instances can be configured in MSTP mode.

Limitations

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.