Cambium Networks cnMatrix EX2010-P Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 38 van 320

L2 Features 38

1. Type the configure terminal command into the terminal. Press Enter key.

2. Type the interface gigabitethernet 0/5 command into theterminal to select theinterface to be

configured. Press Enter key.

3. Type the switchport mode trunk command into theterminal to select the trunk port mode. Press

the Enter key.

4. Type the exit commandinto the terminal to go back to the global configuration mode. Press Enter

key.

5. Type the vlan 10commandinto theterminal to enter the configuration vlan mode, and to select

the VLAN to be configured. Press Enter key.

6. Type the ports add gigabitethernet 0/5 command into theterminal to configure the port list for

VLAN 10.

7. Type the end commandinto theterminal to go back to the Privileged EXEC mode. Press Enter key.

8. Type the show vlan port gigabitethernet 0/5 command into theterminal to display information

about the configured interface. Press Enter key.

For more information, see VLAN Parameters and Commands.

Create a range of VLANs

Starting with cnMatrix 3.0.1 release you can create a group of VLANs using vlan range command.

l

Create a VLAN range

EX2052-123460(config)# vlan range 10-20

l

Add ports to a VLAN range

EX2052-123460(config-vlan-range)# ports add gigabitethernet 0/3,0/4

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.