Cambium Networks cnMatrix EX2010-P Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 166 van 320

L2 Features 166

cnMatrix(config-if)# switchport customer-vlan 2 svlan-prio {<0-7> | none}

let’s say 5 in our example.

This means that any packet that ingresses on the customer port on C-VLAN 2 will have an S-TAG

containing S-VLAN 102 and dot1p 5.

5. For untagged traffic ingressing on customer ports:

cnMatrix(config-if)# switchport customer-vlan pvid 2

Untagged traffic will get C-VLAN 2, and will go to S-VLAN 102 (as C-VLAN 2 is associated to S-

VLAN 102).

or

cnMatrix(config-if)# switchport customer-vlan pvid 5

Untagged traffic will get C-VLAN 5, and will go to S-VLAN 100 (as C-VLAN 5 is not associated to

any S-VLAN, it will go to the default S-VLAN).

or

cnMatrix(config-if)# switchport customer-vlan pvid disable

Untagged traffic will be left untagged. If a default service-vlan is configured for the port, it will go

to that S-VLAN, if not, it will be dropped.

6. Add provider ports to the desired S-VLANs.

cnMatrix(config) #vlan 100

cnMatrix(config-vlan)# ports add gi 0/2

cnMatrix(config) #vlan 102

cnMatrix(config-vlan)# ports add gi 0/2

cnMatrix(config) #vlan 103

cnMatrix(config-vlan)# ports add gi 0/2

7. Add customer-edge ports to the S-VLANs. Customer-edge ports must be added as untagged

ports.

cnMatrix(config) #vlan 100

cnMatrix(config-vlan)# ports add gi 0/1 untagged gi 0/1

cnMatrix(config) #vlan 102

cnMatrix(config-vlan)# ports add gi 0/1 untagged gi 0/1

cnMatrix(config) #vlan 103

cnMatrix(config-vlan)# ports add gi 0/1 untagged gi 0/1

8. Configure additional parameters, if needed

cnMatrix(config-if)# #switchport ingress ether-type x88a8

this is the default setting, but we support also 0x8100 and 0x9100.

cnMatrix(config-if)# #switchport egress ether-type x88a8

same thing, but for egress.

cnMatrix(config-if)# service-vlan <vlan-id> pvid

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.