Cambium Networks cnMatrix EX2010-P Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 130 van 320

L2 Features 130

By default, Rate-Limit-Input is not configured

Configuring Rate-Limit-Input in CLI Interface (Example)

1. Type the configure terminal command into the terminal. Press the Enter key.

2. Type the interface gigabitethernet 0/1 command into the terminal to select the interface to be

configured. Press the Enter key.

3. Type the rate-limit input 100M command into the terminal to configure the rate-limiting for the

interface. Press the Enter key.

4. Type the end command into the terminal to go to the Privileged EXEC mode. Press the Enter key.

5. Type the show interface rate-limit input into the terminal to display the interface status and

configurations (verify if rate-limit is displayed in the output with the previously configured values).

Press the Enter key.

cnMatrix Rate-Limit-Output Parameters and Commands

Commands Description CLI Mode

rate-limit output [<rate-value>] [<burst-

value>]

Available options:

l

rate-value - Configuresthe

maximum rate (in kbps) at which

packets can be sent out through

the interface.

Enables the rate-limiting and burst size

rate limiting by configuring the egress

packet rate of an interface.

Interface

Configuration

(Physical

Interface)

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.