BZBGear BG-EXD-150C handleiding
Handleiding
Je bekijkt pagina 9 van 12
BZBGEAR BG-EXD-150C PRODUCT MANUAL
11
RS-232
3-pin phoenix connector, connected to a PC or control system
for RS-232 command transmission.
12
PC
USB-B port, connected to PC.
Receiver
No
Name
Description
1
PWR LED
The power LED is on when the Receiver is powered on.
2
SERVICE
Micro USB port, used to update MCU firmware.
3
DC 24V
DC 24V/1A power input port.
Note: The extender supports POC functionality which means
that either Transmitter or Receiver is connected to 24V/1A
power supply, the other does not need a power supply.
4
HDBT IN
HDBT input port, connected to the HDBT OUT port of the
Transmitter with CAT6 cable.
5
Link Signal
Indicator (Green)
Solid: Transmitter and Receiver are in good connection
status.
Flashing: Transmitter and Receiver are in poor connection
status.
Dark: Transmitter and Receiver are not connected.
6
Data Signal
Indicator (Yellow)
Solid: DP signal with HDCP.
Flashing: DP signal without HDCP.
Dark: No DP signal.
7
DP OUT
DP signal output port, connected to DP display device
such as TV or monitor.
Address: 830 National Drive #140, Sacramento, CA 95834, USA · Tel: +1(888)499-9906 · Email: support@bzbgear.com 9
Bekijk gratis de handleiding van BZBGear BG-EXD-150C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BZBGear |
| Model | BG-EXD-150C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1943 MB |
