BZBGear BG-EXD-150C handleiding
Handleiding
Je bekijkt pagina 8 van 12
BZBGEAR BG-EXD-150C PRODUCT MANUAL
Operation Controls and Functions
Transmitter
No
Name
Description
1
PWR LED
The red LED is on when the Transmitter is powered on.
2
EDID DIP
switch
Used for EDID setting (COPY by default). COPY: Copy the EDID
of the DP OUT port of Receiver. STD: Default 1080P 2CH
3
SERVICE
Micro USB port, used to update MCU firmware.
4
DC 24V
DC 24V/1A power input port.
Note: The extender supports POC functionality which means
that either Transmitter or Receiver is connected to 24V/1A
power supply, the other does not need a power supply.
5
HDBT OUT
HDBT output port, connected to the HDBT IN port of the
Receiver with CAT6 cable.
6
Link Signal
Indicator
(Green)
Solid: Transmitter and Receiver are in good connection status.
Flashing: Transmitter and Receiver are in poor connection
status.
Dark: Transmitter and Receiver are not connected.
7
Data Signal
Indicator
(Yellow)
Solid: DP signal with HDCP.
Flashing: DP signal without HDCP.
Dark: No DP signal.
8
DP IN
DP signal input port, connected to DP source device such as
computer host.
9
IR IN
Connected to IR receiver cable. The IR receive signal will emit
to the IR OUT port of the Receiver.
10
IR OUT
Connected to IR blaster cable. The IR emit signal is from the IR
IN port of the Receiver.
Address: 830 National Drive #140, Sacramento, CA 95834, USA · Tel: +1(888)499-9906 · Email: support@bzbgear.com 8
Bekijk gratis de handleiding van BZBGear BG-EXD-150C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BZBGear |
| Model | BG-EXD-150C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1943 MB |
