Handleiding
Je bekijkt pagina 7 van 63
INSTALLATION, USE & CARE INSTRUCTIONS
INSTALLATION
7
OPTIONAL LINERS
For installations where the PMA400SS unit is less than 30”
above cooktop, this powerpack insert should be mounted
into a metal liner (FIG. 4) to protect cabinetry combustible
material from heat, in order to meet building code
requirements. This will allow easier cleaning and provide
protection to the cabinetry. Refer to table at right to find the
liner model corresponding to the cabinet style and width.
Visit www.broan-nutone.com or www.broan-nutone.ca to view
specific model information.
liner MoDel cabinet noMinal WiDtH
LB30SS 30"
LB36SS 36"
REMOVE THE CABINET BRACKETS
Detach the cabinet brackets (grey part in FIG. 6) from the back
of the powerpack insert by removing its 4 retaining screws.
Discard the screws.
Fold up and down the bracket until it is split in two separate
parts (FIG. 7). Keep the brackets for possible further use.
NOTE: Both cabinet brackets have one wide edge and one
narrow edge (FIG. 8), to cover all installation
configurations depending on cabinet widths.
HD1410
FIG. 6
SCREWS
HO0413
FIG. 7
HO0408
Wide edge
Narrow edge
FIG. 8
REMOVE THE ADAPTER/DAMPER
Detach and set aside the 3¼” x 10” adapter/damper (grey part
in FIG. 5) from the side of the powerpack insert by removing
its 2 retaining screws. Discard the screws.
HD1409
FIG. 5
SCREWS
HD1051
METAL LINER
FIG. 4
Bekijk gratis de handleiding van Broan PMA400SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Broan |
| Model | PMA400SS |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 8839 MB |
