Brecknell SBI-240 handleiding
Handleiding
Je bekijkt pagina 32 van 79
30 SBI-240 Service Manual
After entering this working mode, the scale will always capture and refresh with the
largest positive number. To exit the HOLD mode, press the SETUP key.
3.12.2 Negative Peak HOLD
When USER-HOLD-HLD.MOD is set to NG.PEAK, the hold mode is negative peak hold
mode. When the scale first enters this working mode, it will display the largest negative
number that is from the time of zero-point set.
After entering this working mode, the scale will always capture and refresh with the
largest negative number. To exit HOLD mode, press the SETUP key.
3.12.3 Toggle HOLD
When USER-HOLD-HLD.MOD is set to TOGGLE, the hold mode is toggle in hold
mode. After entering this working mode, the scale will freeze and display the number if
the scale is stable. Only the weight that is over USER-OTHER-NLD.RNG (zero 'dead'
band ) can be held.
To exit HOLD mode, press the SETUP key. If the length of time that the scale is
unstable for more than USER-HOLD-STB.TIM, STB.ER will be displayed. Press the
TARE/PRESET key to start averaging again, or press the SETUP key to exit.
3.12.4 Average HOLD
When USER-HOLD-HLD.MOD is set to AVERAG, the hold mode is average hold
mode. After entering this working mode, the scale will freeze and display number if the
scale is stable. If the scale is not stable, but the variation is less than USER-HOLD-
HLD.RNG, the scale will average data in USER-HOLD-AVG.TIM, then freeze and
display the number. Only the weight that is over USER-OTHER-NLD.RNG can be
frozen. Scale will exit HOLD mode according to the setting of USER-HOLD-HLD.TIM.
If the time of scale variation is over USER-OTHER-NLD.RNG or is more than USER-
HOLD-STB.TIM, STB.ER will be displayed. Press TARE/PRESET, UNIT/DATA, ACC/
TOTAL or PRINT/FUNC to start averaging again, or press SETUP key to exit.
3.12.5 Auto HOLD (default setting)
When USER-HOLD-HLD.MOD is set to AUTO, the hold mode is auto hold mode.
Different subjects can be weighed one after another without pressing any buttons. After
entering this working mode, the scale will freeze and display the number if the scale is
stable. If the scale is not stable, but the variation is less than USER-HOLD-HLD.RNG,
the scale will average data in USER-HOLD-AVG.TIM, then freeze and display the
number. Only the weight that is over USER-OTHER-NLD.RNG can be frozen. If the
held weight is removed, and a new load is placed on the scale, the scale will
automatically hold the new number of the load.
The scale will exit HOLD mode according to the setting of USER-HOLD-HLD.TIM. If
the time of scale variation is over USER-OTHER-NLD.RNG or is more than USER-
HOLD-STB.TIM, STB.ER will be displayed. Press the TARE/PRESET key to start
averaging again, or press SETUP key to exit.
Bekijk gratis de handleiding van Brecknell SBI-240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI-240 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9396 MB |
