Brecknell SBI-240 handleiding
Handleiding
Je bekijkt pagina 33 van 79
SBI-240 Service Manual 31
4 Setup Mode
The setup menu consists of five different sub-menus. Within each sub-menu are
different menu options.
The config/cal switch must be set in the ON position in order to make changes to
specific parameters.
4.1 Entering the Setup Menu
1. Power on the indicator by pressing and holding the ZERO/ON/OFF/ key.
2. Press the SETUP key for 3 seconds. The indicator shows config
to indicate
the Setu
p Menu mode has been entered.
3. In the Setup mode, use the arrow keys to select a menu item. Press the TARE/
PRESET key to enter the parameter.
4. Press the key to select the sub-menu item, to select a choice, to
set a number, to confirm and save data, and/or to exit this mode.
4.2 Navigating the Setup Menu
1. Once Config is displayed, use the [UNIT] key to move to forward through
the menu choices or the [HOLD] key to move backward in the setup menu.
2. Use the [TARE] key to access the desired menu. (e.g. User)
3. Use the [UNIT] key to view the available sub-menus (parameter: e.g. beep).
4. Use the [TARE] key to select the sub-menu.
5. Use the [UNIT] key to view the choices within the sub-menu. (e.g. key)
6. Press the [TARE] key to select the desired choice within the sub-menu. On
ce
selected
the parameter will be displayed.
7. Press [ZERO] to return back up and return to the setup menu.
CONFIG USER CAL MISC TEST
Bekijk gratis de handleiding van Brecknell SBI-240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI-240 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9396 MB |
