Brecknell SBI-240 handleiding
Handleiding
Je bekijkt pagina 31 van 79
SBI-240 Service Manual 29
5. Press the SETUP key for the displayed weight to be restored to 1234.5, and
then press the TARE/PRESET key to confirm and exit to normal weighing
mode.
3.12 HOLD Function
HOLD function can be used to freeze the display number. In this mode, the scale can
catch a dynamic number, hold a stable number, or average an unstable number and
HOLD (freeze) this number temporary for the user to watch or record.
In Positive or Negative Peak HOLD mode, the PEAK and HOLD annunciator will be lit,
and for other HOLD modes, the HOLD annunciator will be lit. When HOLD annunciator
is flashing, the displayed number is live. When HOLD annunciator becomes steady, the
displayed number is frozen.
This function can be used in normal weighing mode, counting mode and percent
weighing mode. After entering HOLD mode, the A/D converter speed can be increased
to 80Hz (if USER-HOLD-AD.H.SPD is set to YES) from the original 10Hz for some
dynamic weighing applications.
With the HOLD function, it is possible to weigh restless weighing samples such as live
animals or moving objects. The indicator provides a special mode setting to
accommodate movement in weight.
1. For the HOLD function to be active, the CONFIG-FUNC-HO
LD menu item must
be s
et to YES. Menu items of USER-HOLD-HLD.MOD /-AVG.TIM /-HLD.TIM /-
STB.TIM, USER-OTHER-NLD.RNG need be set to reasonable values.
2. To increase the speed for sampling of weight, set USER-HOLD-
AD.H.SPD
me
nu item to YES.
3. To enter HOLD working mode, press the SETUP key when scale is in norma
l
weighing
mode, counting mode or percent weighing mode.
There are several HOLD modes use to freeze display data:
l Positive Peak Number HOLD mode
l Negative Peak Number HOLD mode
l Toggle HOLD mode
l Average HOLD mode
l Auto HOLD mode
Refer to the following sections for information on the available HOLD modes.
3.12.1 Positive Peak HOLD
When USER-HOLD-HLD.MOD is set to PS.PEAK, the hold mode is positive peak hold
mode. When the scale first enters this working mode, it will display the largest positive
number that is from the time of zero-point set.
NOTE: The Hold Function is disabled when legal for trade is enabled.
Bekijk gratis de handleiding van Brecknell SBI-240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI-240 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9396 MB |
