Brecknell SBI-240 handleiding
Handleiding
Je bekijkt pagina 30 van 79
28 SBI-240 Service Manual
3.11 Weight Fine-tune
With this function, the user can adjust the displayed weight (to a minimal extent) with
no need for standard weight.
1. In normal weighing mode, place a load onto scale. For example 1230.0
The indicator will display the weight (for example 1234.5). Press the
TARE/PRESET and ZERO/ON/OFF keys at same time until first digit
flashes, which means indicator has entered into "weight fine-tune"
mode.
2. Use the key to enter the correct weight (the load weight e.g.
123
0.0).
3. Confirm by pressing the TARE/PRESET key.
The active correct weight will be displayed and the digits will no longer
be flashing. The displayed weight will be adjusted by this ratio (1230.0/
1234.5) and this ratio will be active until the next modification.
To remove effect of this ratio, follow one of the two options below:
1. Perform standard calibration, refer to the section on "CALIBRATION".
2. Remove weight from the scale and press the ZERO/ON/OFF key to display 0.
3. Place a load onto th
e scale.
A number will be displayed (for example it dis
played 1230.0 lb but the
original number is 1234.5).
4. Press the TARE/PRESET and ZERO/ON/OFF at the same time until first digit
flashes, which means indicator has entered into "weight fine-tune" mode.
NOTE: The Weight Fine-tune Mode is disabled when legal for trade is enabled.
NOTE: The scale must have been calibrated before this adjustment.
NOTE: The range of adjustment is "(current displayed weight) x (0.9-1.1)". This
means the range is about ±10%.
NOTE: The "CONFIG-REGULA =NONE" and "CONFIG-FUNC-WT.ADJ=YES" must
be set.
Bekijk gratis de handleiding van Brecknell SBI-240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI-240 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9396 MB |
