Brecknell SBI-240 handleiding

79 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 29 van 79
SBI-240 Service Manual 27
3.10 BMI Working Mode
1. To enter BMI Working mode, CONFIG-FUNC-ACCUMU= Yes:
2. If In normal weighing mode, percent weighing mode, or counting mo
de, press
and
hold the FUNC key for 4 seconds.
One of the following will be displayed (WEIGH / COUNT / PERCENT)
depending on the mode that was set previously.
3.
Use the key to select BMI, then press T
ARE/PRESET to confirm
BMI mode.
When the scale enters this mode, "CM.xxx" (means: last input height is
xxx cm) or "IN.xx.x" (means: last input height is xx.x inch) will be
displayed, and to wait for input height.
3a. To change height unit to cm or inch, press the UNIT/DATA key.
3b. To change height number, use the keys.
3c. To quickly increase or decrease the number, press and hold PRINT/FUNC or
ACC/TOTAL key.
4. Press the TARE/PRESET key to confirm the input.
5.
Press the ZERO/ON/OFF key to exit input data mode and re
turn to BMI
working m
ode
.
Th
e range of height is 50-250cm (19.7-98.4inch) and default is
170cm(66.9inch)
6. In this mode, when BMI number is displayed (BMI annunciate is also
lit), or
weight n
umber is shown (BMI and kg or lb annunciators are lit), press the
ACC/TOTAL key to select weight or BM
I number to be displayed.
7. When the weight is displayed, the unit can be selected by pressing the UNIT/
DATA key. The BMI and weight unit will be displayed at same time.
8. In this mode, when current net weight is less than NLD.RNG, the indicator
will
go to the display weight number if CONFIG-FUNC-ACCUMU= No; or the
indicator will
return to original working mode if CONFIG-FU
NC-ACCUMU=
Ye
s.
NOTE: The BMI Working Mode is disabled when legal for trade is enabled.
NOTE: Set CONFIG-FUNC-BMI menu to YES for use of the BMI working mode
function.

Bekijk gratis de handleiding van Brecknell SBI-240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBrecknell
ModelSBI-240
CategorieNiet gecategoriseerd
TaalNederlands
Grootte9396 MB