Brecknell SBI 210-LCD handleiding
Handleiding
Je bekijkt pagina 22 van 29
AWT35-100109 Rev AB 22/29
PRIM.D
0.0001~
50
0.5
Sets the weight division (1 div = 0.5 lb)
value of the first unit of measure.
The division value of the secondary unit of
measure (1 div = 0.2 kg) is automatically
determined by the indicator according to
the first unit.
PRIM.Ut
kg / lb lb
Selects the primary unit of measure: kg or
lb.
The default calibration unit is the primary
unit.
SECND.N
100~
125000
2500
Sets the number of divisions (div) of the
secondary unit of measure (kg).
Max 1.25*(PRIM.N)
MOTION
1~255 4
Sets the in-motion weight divisions range:
1~255 = ±0.25div * (1~255)
OVER.LD
0~100 0
Sets the overload weight limit:
0 = FS + 9 div
1~100 = 101%FS ~ 200%FS
UNITS
kg YES / NO YES
Sets the active unit of measure:
Yes = enable the unit;
No = the unit is not active.
lb YES / NO YES
oz YES / NO NO
lb oz YES / NO NO
ZRO.PNT
IZSM 0~100 100
Sets the initial zero (power on zero)
weight range:
0 = no limit;
1~100 = (calibration zero point) ±1%FS ~
(calibration zero point) ±100%FS
IN.IZSM
WEIGHT
WEIGHT
Sets the weight type as current initial zero
point when current weight is inside the
IZSM range:
WEIGHT = current weight;
CAL.ZRO = calibration zero;
LAST.Z.T = last zero/tare value.
CAL.ZRO
LAST.Z.T
Bekijk gratis de handleiding van Brecknell SBI 210-LCD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI 210-LCD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4092 MB |
