Brecknell SBI-110 handleiding
Handleiding
Je bekijkt pagina 24 van 29
AWT35-501860 Issue AE.1 Page 24
7. RS232 Communications
RS232 allows the scale to communicate with a remote peripheral device such as a printer or
computer. RS232 kit p/n AWT15-501905.
7.1 Kit Installation
1. Disconnect the power adaptor from the back of the indicator;
2. Unscrew the signal cable connector and pull it free from the back of the indicator;
3. Remove the indicator from the bracket and place the indicator face down on a padded surface;
4. Remove the recessed screws with a Phillips head screwdriver;
5. Gently separate the halves of the indicator;
6. Carefully remove the plastic punch out in the back of the indicator housing shown in Figure;
7. Attach and secure the RS232 card to the case with the supplied screws;
8. Locate the connector on the PC board;
9. Reassemble the indicator
Figure – RS232 Card and Connector
7.2 Output Specifications
• RS-232 output of weighing data
• ASCII code
• 8 data bits
• Parity None, Stop Bit 1
• Baud rate from 1200bps to 38400bps. If enabled the default baud rate is 9600bps.
Bekijk gratis de handleiding van Brecknell SBI-110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI-110 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6197 MB |
