Handleiding
Je bekijkt pagina 38 van 211
INSTALLATIONINSTALLATION
10
EN
— Place your hob in the opening of the support
cabinet, carefully pulling the table toward you.
— Reposition the burner heads, burner covers
and pan supports on the hob.
— Connect your hob to the gas supply (See “Gas
Connection” chapter) and to the power supply
(See “Electrical Connection” chapter).
— If you wish, you can immobilise the hob
using the four mounting brackets delivered with
a screw (Fig. 02) to attach them to the four
corners of the housing.
You must use the holes
provided for this purpose, according to the
diagram above (Fig. 01).
— Stop screwing when the mounting bracket
starts to become deformed.
Do not use a screwdriver.
Fig. 01
Fig. 02
Mounting
brackets
Screw
Underside view
of the housing
Cabinet
The appliance must be plugged in using a
standardized power cable with 3 conductors
each 1 mm² ( 1 ph + 1 N + ground) which must
be connected to the 220~240 Volt network by
means of a standardized IEC 60083 power socket
or a single-pole cut-o device in compliance
with installation regulations. The safety wire
(green-yellow) is connected to the appliance’s
ground terminal and must be connected to the
installation’s ground lead.
The plug of the electrical outlet must be accessible
after installation.
A
A
Mounting brackets
A
A
A
Blue wire
H05V2V2F cable
Black, brown
or red wire
Green yellow wire
Connect the wires to the electricity supply
making sure that the different-coloured
wires are in the right order.
Cross-seCtion of Cable to be used
Tension 220-240 V~ - 50 Hz
H05V2V2F - T90 Cable
3 conductors
including 1 ground
Cross-section of
conductors in mm
2
1
Fuse 10 A
Tips for ush mounting Electrical connection
Tip
Using a gas cooking appliance results in the
generation of heat and humidity in the location
where it is installed. Make sure that your kitchen is
well-ventilated: keep natural ventilation openings in
your home clear or install a mechanical ventilation
device (mechanical ventilation hood). Intensive,
prolonged use of the appliance may require
additional ventilation; you can, for example, open
a window or provide more eective ventilation by
increasing the power of the mechanical ventilation
system, if you have one. (A minimum air ow of
2 m³/h per kW of gas power is required).
Neutral (N)
Phase (L)
Ground
Bekijk gratis de handleiding van Brandt BPG6413BM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brandt |
| Model | BPG6413BM |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 33548 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Soort bediening | Draaiknop |
| Kleur van het product | Zwart |
| Ingebouwd display | Nee |
| Timer | Nee |
