Handleiding
Je bekijkt pagina 39 van 211
INSTALLATIONINSTALLATION INSTALLATIONINSTALLATION
11
EN
For your safety, you must choose from the three
following connection options:
— Connection with a rigid pipe made from
copper and with screw-on mechanical
connectors (G1/2 gas standard mark). Make
the connection directly to the end of the elbow
fitted on the appliance.
— Connection with a wavy metal hose
(stainless steel) with screw-on mechanical
connectors whose service life is unlimited (Fig.
A).
— Connection with a reinforced flexible
rubber hose with screw-on mechanical
connectors whose service life is 10 years
(Fig. B).
If your hob is installed above an oven or if proximity to other heating elements poses a threat of
overheating the connection, you must insulate the cable in a rigid pipe.
If a hose or soft pipe (in the case of butane gas) is used, it should not come into contact with a moving
part of the cabinet, nor should it pass through a location that may become blocked.
The gas connection must be installed in compliance with applicable regulations in the country of
installation.
Fig. A
Fig. B
Gas connection
Preliminary comments
Gas distributed via natural gas pipes
Important
When connecting your hob’s gas supply, if you
have to change the direction of the elbow tted
on the appliance:
- Change the gasket.
- Screw on the elbow’s nut, careful not to exceed
a torque of 17 N.m.
Bekijk gratis de handleiding van Brandt BPG6413BM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brandt |
| Model | BPG6413BM |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 33548 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Soort bediening | Draaiknop |
| Kleur van het product | Zwart |
| Ingebouwd display | Nee |
| Timer | Nee |
