Handleiding
Je bekijkt pagina 20 van 52
Information
Sufficient air is needed for proper combustion and exhaustion of gases
through
the flue (chimney) of fuel burning equipment to prevent back
drafting. Ductless
fans must always be vented to the outdoors.
When assessing the air pressure, the entire ventilation system in the
house/apartment must be taken into account, e.g. hob and/or gas
cooker, this
rule does not apply.
Government regulations must be observed for the conveyance of
exhaust air.
If the extractor hood is used in circulating air mode with
activated carbon filter,
there are no
operating
restrictions.
Prepare the installation:
Ensure the power has been turned off before
beginning this installation.
Plug must be
assembled in places easy to drag and insert.
To install this hood you will require
two
assistants. You will need
following tools
and material to
complete this installation.
Tools you will need:
Drill appropriate to your wall
Phillips Screwdriver
Tape Measure
Hand Saw or Jig Saw
Installation work and electrical wiring
must be done
by qualified person(s) in
accordance with all applicable
codes
and standards, including fire rated
construction.
Do not discharge the exhaust air into
a flue from other
appliances burning
gas or other fuels. Regulations
concerning the discharge of air have to be fulfilled.
The cooker hood must be placed at a minimum distance
of 65cm above
the cooking surface of a hob.
Min. 650mm
Max. 750mm
597/897mm
A
If you choose extraction-air mode,
install check valve on the vent hole .
20
Bekijk gratis de handleiding van Brandt BHC6601X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brandt |
| Model | BHC6601X |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 5885 MB |
