Bradley S19274E handleiding
Handleiding
Je bekijkt pagina 7 van 35
7
Installation S19-270C, S19-270E, S19274C, S19274E
Bradley • 215-1326 Rev. V; ECN 15-05-042 10/5/2017
Installation — Eye/Face Wash
25"
(635mm)
9¼"
(235mm)
Ref.
2½"
(64mm)
Min.
Deck
B
P.O. BOX 309, MENOMONEE FALLS, WI 53052-0309 USA
TEL: 1-800-BRADLEY FAX: (262-251-5817)
http://www.bradleycorp.com
114-051
D
To
Wall
Connect the water supply using
piping (supplied by installer) with
½" NPT female threaded end.
C
Proper faucet shank/handle
clearance and recommended
minimum splash containment
dimensions must be considered
when selecting the desired
location for mounting.
5¾"
(146mm)
Ref.
2¹⁄₈"
(54mm)
Min.
"ON" Position
"OFF" Position
13⁷⁄₈"
(352mm)
Radius
Deck Mounting Pattern
Drill (3) holes as shown.
A
2"
(51mm)
Ø ³⁄₁₆"
Ø 1¹⁄₈"
13"
(330mm)
Ref.
Halo eye/face wash right-hand unit is shown on a sample 25" deck. Other units are similar. For classic eye/face wash
installation, refer to the dimensions on page 5 to determine optimal mounting position. Refer to page 8 for left-hand units.
Minimum dimensions necessary to contain splashing from Halo units are shown.
Apply pipe sealant (supplied by installer) to all male-threaded pipe joints. The top of the eyewash heads should be positioned
a minimum of 33" (838mm) and a maximum of 45" (1143mm) from the floor and 6" (152mm) from the nearest obstruction.
Slowly open the water
supply lines to relieve air
and pressurize the valve.
Test the unit for leaks
and adequate flow.
E
Bekijk gratis de handleiding van Bradley S19274E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bradley |
| Model | S19274E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6074 MB |
