Bradley S19274E handleiding
Handleiding
Je bekijkt pagina 6 van 35
6
S19-270C, S19-270E, S19274C, S19274E Installation
10/5/2017 Bradley • 215-1326 Rev. V; ECN 15-05-042
Installation — Eyewash
Halo eyewash right-hand unit is shown on a sample 25" deck. Other units are similar. For classic eyewash installation,
refer to the dimensions on page 4 to determine optimal mounting position. Refer to page 8 for left-hand units.
Minimum dimensions necessary to contain splashing from Halo units are shown.
Apply pipe sealant (supplied by installer) to all male-threaded pipe joints. The top of the eyewash heads should be
positioned a minimum of 33" and a maximum of 45" from the floor and 6" from the nearest obstruction.
25"
(635mm)
7¾"
(197mm)
Ref.
2"
(51mm)
Ref.
¾" (19mm)
Min.
Deck
B
P.O. BOX 309, MENOMONEE FALLS, WI 53052-0309 USA
TEL: 1-800-BRADLEY FAX: (262-251-5817)
http://www.bradleycorp.com
114-051
D
To
Wall
Connect the water supply using
piping (supplied by installer) with
½" NPT female threaded end.
C
Slowly open the water
supply lines to relieve air
and pressurize the valve.
Test the unit for leaks
and adequate flow.
E
Proper faucet shank/handle
clearance and recommended
minimum splash containment
dimensions must be considered
when selecting the desired
location for mounting.
5¾"
(146mm)
Ref.
2⁵⁄₈" (67mm)
Ref.
5¼"
(133mm)
Min.
"ON" Position
"OFF" Position
8"
(203mm)
Radius
Deck Mounting Pattern
(drill (3) holes as shown)
A
2"
(51mm)
Ø ³⁄₁₆"
Ø 1¹⁄₈"
Bekijk gratis de handleiding van Bradley S19274E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bradley |
| Model | S19274E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6074 MB |
