Boss SDE-3000EVH handleiding
Handleiding
Je bekijkt pagina 5 van 47

5
Panel Descriptions
Rear Panel
F J I G H
A
E
B C
D
K
L
Area Explanation
A
INPUT [MONO] L/MONO jack
Connect your guitar or keyboard here.
For a mono connection, use only the L/MONO jack.
If the unit is set for stereo input, use this to input the L channel
audio.
B
EXT LOOP RETURN/INPUT R jack
Connect this to the output of an external eect unit.
If this unit is set for stereo input, use this to input the R channel
audio.
C
EXT LOOP SEND jack
Connect this to the input of an external eect unit.
D
EXT LOOP GND LIFT switch
This should normally be set to “OFF”.
Noise may occur due to a ground loop when you connect an amp to
the EXT LOOP (SEND/RETURN) jack. The noise may be eliminated if
you switch to “LIFT”.
E
RETURN IMPEDANCE switch
Set this to match the output impedance of the device that’s
connected.
When inputting in stereo, set this to “Hi-Z” so that the left/right
signal levels are matched.
F
OUTPUT [DIRECT] L/MONO jack
Connect this to your guitar amp, mixer or other audio equipment.
For a mono output, connect only to the L/MONO jack.
G
OUTPUT [EFX L] R jack
Connect this to your guitar amp, mixer or other audio equipment.
Area Explanation
H
OUTPUT [EFX R] jack
Connect this to your guitar amp, mixer or other audio equipment.
I
CTL 2, 3/EXP 1 jack
You can connect an expression pedal
(*1)
or footswitches
(*2)
to these
jacks for controlling a variety of parameters.
* Use only the specied expression pedal. By connecting any other expression
pedals, you risk causing malfunction and/or damage to the unit.
* For more about footswitch settings, refer to “Connecting Footswitches” (p. 29).
J
CTL4, 5/EXP2/GA-FC jack
You can connect an expression pedal
(*1)
or footswitches
(*2)
and foot
controllers
(*3)
to these jacks for controlling a variety of parameters.
K
DC IN jack
Connect the AC adaptor here.
The SDE-3000EVH powers up when the AC adaptor is connected to
the DC IN jack.
L
Ground terminal
Connect this to an external earth or ground if necessary.
*1 Expression pedal
Sold separately: EV-30, FV-500L, FV-500H, Roland EV-5
*2 Footswitch
Sold separately: FS-5U, FS-5L, FS-6, FS-7
*3 Foot controller
Sold separately: GA-FC, GA-FC EX
Side Panel
USB port (USB Type-C
®
)
Connect your computer using a commercially available USB cable that
supports USB 2.0.
Ø “Connecting to a Computer” (p. 39)
* Do not use a USB cable that is designed only
for charging a device. Charge-only cables
cannot transmit data.
MIDI (OUT/IN) jacks
Use TRS/TRS or TRS/MIDI connecting cables to connect this unit to an
external MIDI device.
Ø “Connecting with an External MIDI Device” (p. 36)
Sold separately:
TRS/TRS connecting cable
BCC-1-3535, BCC-2-3535
TRS/MIDI connecting cable
BMIDI-5-35, BMIDI-1-35, BMIDI-2-35
Bekijk gratis de handleiding van Boss SDE-3000EVH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Boss |
| Model | SDE-3000EVH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10610 MB |





