Boss SDE-3000EVH handleiding
Handleiding
Je bekijkt pagina 6 van 47
6
Panel Descriptions
1. Select a memory.
[DDL 1] switch + [DDL 2] switch: previous memory
[DDL 2] switch + [TAP/CTL 1] switch: next memory
This immediately switches to the next two memories.
For instance, when
A.01 is selected, the [DDL 1] switch selects and
turns on/o the delay for A.01 (odd-numbered memories), and the
[DDL 2] switch selects and turns on/o the delay for A.02 (the even-
numbered memories).
Selects the previous memory
(memory decrement)
Selects the next memory
(memory increment)
¸¸¸¸¸¸¸¸¸¸¸¸
Ʒ01
2. Select the memories using the [DDL 1] and [DDL 2]
switches.
If you press the same switch twice in a row, you can turn the delay
o or restore the memory to its stored state.
¸¸¸¸¸¸¸¸¸¸¸¸
Ʒ01
Selects and turns on/o the
even-numbered memories
¸¸¸¸¸¸¸¸¸¸¸¸
Ʒ02
3. To turn the delay o, press the same switch again.
Selecting Memories via Foot Control
The SDE-3000EVH has 100 memories, and you can select the memories via foot control.
Memories: EVH 1–EVH 8, A.01–A.04, B.01–B.04, C.01–C.84
Memory mode
(factory setting)
In this mode, the 100 memories are selected in sequential order, two at a time.
Further, this mode features an “immediate” mode that lets you select odd-numbered memories, and a “wait” mode that lets you show two
memories and then select a memory.
Immediate
Switches to odd-numbered memories, two at a time. To select an even-numbered memory, press the [DDL 2] switch.
Conguring the Footswitch Mode
The footswitch mode features a “manual mode” in which you can select one memory at a time in order, and “memory mode” in which you can
select two memories at a time in order. Further, memory mode features an “immediate” mode that lets you select odd-numbered memories, and a
“wait” mode that lets you show two memories and then select the memory.
MEMO
The unit is set to memory mode when shipped from the factory.
1. Press the [SETUP] button.
2. Use the [TIME] buttons to select “SYSTENSYSTEN”, and press
the [SETUP] (ENTER) button.
3. Use the [TIME] buttons to select the “FS.NdFS.Nd” and
“ŷNodŷNod” parameters, and then use the [DEPTH] buttons
to change the value.
Select the parameter Edit the value
Parameter Value Explanation
FS.Nd
(Footswitch Mode)
NAnvAL
(Manual)
Manual mode.
Selects one memory at a time.
NENory
(Memory)
Memory mode.
Selects two memories at a time.
ŷNod
(M. Mode)
iNNEdit
(immediate)
Immediate.
Switches immediately to the memory
after the next in memory mode.
ľAit
(Wait)
Wait.
In memory mode, when two
memories are displayed via foot
control, the memory switches only
when you operate a foot control once
more.
Bekijk gratis de handleiding van Boss SDE-3000EVH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Boss |
| Model | SDE-3000EVH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10610 MB |
