Bosch VideoJet decoder 7000 handleiding
Handleiding
Je bekijkt pagina 15 van 24
VIDEOJET decoder 7000 Configuration | en 15
Bosch Security Systems B.V.
Installation manual
2024-11 | V01 | F.01U.420.692
Video windows
Video windows group
This group allows you to configure the default display of the cameos. Cameos are the
viewlets which show the video stream in your video management system.
Ignore video aspect ratio
With this parameter you define the handling if the cameo and the video stream aspect ratio
are not matching. Choose Off to display the original video stream aspect ratio; unused
cameo space is blackened. Choose On to use the complete cameo; overhanging video is cut
off.
Aspect ratio
Select the default aspect ratio for cameos. Choose the ratio that is appropriate for most of
your video sources.
Metadata
Define if you want to display metadata overlays in the video. Metadata overlays will only be
shown if provided with the connected video stream.
Video smoothing
Due to network jitter decoded videos might be jerky. You can improve the smoothness with
the disadvantage that the video display is delayed. The higher the selected value, the
smoother the video but the greater the time delay. Select 0(zero) to disable video
smoothing.
Distance between cameos
Set your preferred distance between the cameos.
Reconnect on restart
If you enable this parameter, the previous session is restored anytime you restart the
decoder. If Reconnect on restart is disabled, connections must be manually re-established
after restarting the decoder.
Number of decoders
Define the maximum number of cameos limiting the number of possible connections, for
example to match the licensed channels of your video management system.
Freeze detection [ms]
Detects if no video packets are received from the camera, then displays FREEZE text as
overlay.
Alarm frame
Defines a frame around the video window in case of an alarm from a camera starts. The
alarm frame can be set to Off, On or Blinking.
Destination group
Set the password to restrict connections between decoders and video sources. Only video
sources which have that password entered as Destination password, can setup a
connection to the decoder.
The password can be used as a general password. For more information, refer to the
documentation of the respective video sources.
Display resolution
By default, Resolution adaptation is set to automatic mode. Thus, on start the optimum
resolution for the display device is selected.
The manual mode should only be used for project-specific adaptations by personnel
qualified by Bosch.
Bekijk gratis de handleiding van Bosch VideoJet decoder 7000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | VideoJet decoder 7000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1455 MB |
