Bosch VideoJet decoder 7000 handleiding
Handleiding
Je bekijkt pagina 14 van 24
14 en | Configuration VIDEOJET decoder 7000
2024-11 | V01 | F.01U.420.692
Installation manual
Bosch Security Systems B.V.
6 Configuration
This chapter is intended for the administrator of the video management system. The setup
process depends on the video management system in use. Refer to the corresponding
documentation for details.
6.1 Setting up the decoder with Configuration Manager
Before you can operate the unit within your network, it must have a valid IP address for your
network and a compatible subnet mask.
i
Notice!
As a default DHCP is enabled in the unit’s network settings.
With an active DHCP server in the network you must know the IP address assigned by the
DHCP server to operate the unit.
The following default address is preset at the factory: 192.168.0.1
For the latest version of the Configuration Manager, go to http://www.boschsecurity.com
and download it from the Software tab of the corresponding product page.
In the Configuration Manager program, the MonitorWall is detected in the same way as
other hardware, for example, a decoder. Various information and further configuration
options are available.
The following sections of this chapter describe the configuration pages of the MonitorWall
found in the Configuration Manager program.
6.1.1 Unit Access Tab
Identification group
Assign a unique name and ID for the decoder in order to make administering of multiple
units easier in larger installations.
Device access group
This group controls access from the Configuration Manager to the decoder. Here, you can
configure settings to specify which protocol and which HTTP port are used for
communication between the Configuration Manager and the decoder.
If the decoder is password-protected, enter the correct user name and password here.
Password group
Enter the passwords for the service and user account. Otherwise, all further configuration
steps will fail.
The decoder works with two password levels:
– The service level is the highest level of authorization. This level allows users access to
all functions of the decoder and to change all configuration settings.
– The user level allows users to make and break connections or switch layouts, but does
not provide access to configuration.
Version information group
This group shows the hardware and firmware versions, and the serial number of the
decoder.
6.1.2 Advanced Tab
i
Notice!
The settings in this area apply to all cameos. You cannot configure settings here for
individual cameos.
Bekijk gratis de handleiding van Bosch VideoJet decoder 7000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | VideoJet decoder 7000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1455 MB |
