Bosch VideoJet decoder 7000 handleiding
Handleiding
Je bekijkt pagina 16 van 24
16 en | Configuration VIDEOJET decoder 7000
2024-11 | V01 | F.01U.420.692
Installation manual
Bosch Security Systems B.V.
Display stamping
The Camera name stamping field sets the position of the camera name overlay. It is, by
default, set to Off for no overlay information.
You can set it at the Top, at the Bottom, or at a position of your choice that you can specify
using the Custom option.
Additional fields are displayed if you select the custom option where you can specify the
exact position.
The Time stamping field sets the position of the time overlay. It is, by default, set to Off for
no overlay information.
You can set it at the Top, at the Bottom, or at a position of your choice that you can specify
using the Custom option.
Additional fields are displayed if you select the custom option where you can specify the
exact position.
The Alarm mode stamping field sets the position of the text message overlay in the event of
an alarm. It is, by default, set to Off for no overlay information.
You can set it at the Top, at the Bottom, or at a position of your choice that you can specify
using the Custom option.
Additional fields are displayed if you select the custom option where you can specify the
exact position.
The Alarm text height [%] field sets the height of the alarm message overlay in the image.
The Alarm text color field sets the color of the text of the alarm message overlay.
The Alarm text background color field sets the background color of the alarm message
overlay.
The Alarm message field sets the text of the message to be displayed in the image in the
event of an alarm. The maximum text length is 31 characters.
6.1.3 Network Access Tab
In this area, you define the network settings for the decoder.
Device IP address
In this box, enter an IP address that is valid in the network.
Subnet mask
Enter an appropriate subnet mask for the IP address.
Gateway address
If required, enter an appropriate gateway address.
i
Notice!
A new IP address, or a new subnet mask or gateway address, does not become valid until
the decoder is restarted.
After entering all required addresses, it is necessary to restart the decoder:
1. In the toolbar, click .
2. Confirm the restart.
3. After restart, the software is available for use under the new addresses.
6.1.4 Extended configuration
In this area, you can activate the extended configuration mode for security features.
If the extended security configuration mode is active, the following options are available:
Bekijk gratis de handleiding van Bosch VideoJet decoder 7000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | VideoJet decoder 7000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1455 MB |
