Bosch GGC 18V-12 Professional handleiding

Niet gecategoriseerd

Bosch

267 pagina's

PDF beschikbaar

Handleiding

/ 267

Je bekijkt pagina 20 van 267

20 | English

Threaded rod cutters GGC 18V-12

Permitted ambient temperat-

ure during operation

and

during storage

°C −20…+50

Recommended rechargeable

batteries

GBA 18V...

ProCORE18V…

Recommended chargers GAL 18...

A) without battery (you can find the battery weights on

www.bosch-professional.com)

B) Limited performance at temperatures <0°C

Values can vary depending on the product, scope of application and

environmental conditions. To find out more, visit

www.bosch-professional.com/wac.

Noise/Vibration Information

Noise emission values determined according

toEN62841‑1.

Typically, the A-weighted noise level of the power tool is:

Sound pressure level83dB(A); sound power

level91dB(A). UncertaintyK=3.0dB.

Wear hearing protection!

Vibration total values a

(triax vector sum) and uncertainty K

determined according to EN62841‑1:

=1.1m/s

, K=1.5m/s

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-

pare power tools. They may also be used for a preliminary

estimation of vibration and noise emissions.

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ac-

cessories or is poorly maintained, the vibration level and

noise emission value may differ. This may significantly in-

crease the vibration and noise emissions over the total work-

ing period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and accessories, keeping their hands warm, and

organising workflows correctly.

Overload protection

In normal conditions of use, the power tool cannot be over-

loaded. In the event of excessive load or temperatures out-

side of the permitted battery temperature range, it will auto-

matically switch off. Then switch off the power tool and stop

the work that caused the power tool to be overloaded.

Switch the power tool back on to restart the work process.

Note: The overload protection is activated if you try cutting

the following types of threaded rods.

– A threaded rod that is larger than the size of the cutting

jaws.

– A threaded rod that has a higher strength than the cutting

capacity of the power tool.

Overheating protection

If the power tool overheats, it will switch off automatically.

Allow the power tool to cool down before switching it on

again.

Rechargeable battery

Bosch sells some cordless power tools without a re-

chargeable battery. You can tell whether a rechargeable bat-

tery is included with the power tool by looking at the pack-

aging.

Charging the battery

u Use only the chargers listed in the technical data. Only

these chargers are matched to the lithium-ion battery of

your power tool.

Note: Lithium-ion rechargeable batteries are supplied par-

tially charged according to international transport regula-

tions. To ensure full rechargeable battery capacity, fully

charge the rechargeable battery before using your tool for

the first time.

Inserting the Battery

Push the charged battery into the battery holder until it

clicks into place.

Removing the Battery

To remove the rechargeable battery, press the battery re-

lease button and pull the battery out. Do not use force to do

this.

The rechargeablebattery has two locking levels to prevent

the battery from falling out if the battery releasebutton is

pressed unintentionally. The rechargeable battery is held in

place by a spring when fitted in the power tool.

Battery charge indicator

Note: Not all battery types have a battery charge indicator.

The green LEDs on the battery charge indicator indicate the

state of charge of the battery. For safety reasons, it is only

possible to check the state of charge when the power tool is

not in operation.

Press the button for the battery charge indicator or to

show the state of charge. This is also possible when the bat-

tery is removed.

If no LED lights up after pressing the button for the battery

charge indicator, then the battery is defective and must be

replaced.

Battery model GBA 18V...

LED Capacity

3× continuous green light 60–100%

1 609 92A A3L | (17.03.2025) Bosch Power Tools

/ 267

Bekijk gratis de handleiding van Bosch GGC 18V-12 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.