Bosch GGC 18V-12 Professional handleiding

Niet gecategoriseerd

Bosch

267 pagina's

PDF beschikbaar

Handleiding

/ 267

Je bekijkt pagina 19 van 267

English | 19

u Wear gloves when machining threaded rods. The

edges and chips of the workpiece are sharp and may still

be hot immediately after machining.

u Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than by

hand.

u To safely cut long or large threaded rods, the power

tool can be positioned on a horizontal surface using

the supporting surfaces. It must not be clamped into a

vice or fastened to a workbench.

u Do not place the power tool on the chips of the work-

piece. This may damage the power tool and cause it to

malfunction.

u Always ensure that you have a stable footing, espe-

cially when working in an elevated position. Hold the

threaded rod during and after cutting to prevent the

cut-off threaded rod from falling down. A cut-off

threaded rod can cause serious personal injury.

u If you are working in an elevated position, secure the

power tool sufficiently using a fall protection system

and ensure that there are no persons below the work

area. Wear protective headgear when carrying out

overhead work. This will enable you to avoid material

damage and personal injury if you inadvertently drop the

power tool.

u In case of damage and improper use of the battery, va-

pours may be emitted. The battery can set alight or ex-

plode. Ensure the area is well ventilated and seek medical

attention should you experience any adverse effects. The

vapours may irritate the respiratory system.

u Do not modify or open the battery. There is a risk of

short-circuiting.

u The battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

u Only use the battery in the manufacturer's products.

This is the only way in which you can protect the battery

against dangerous overload.

Protect the battery against heat, e.g. against

continuous intense sunlight, fire, dirt, water

and moisture. There is a risk of explosion and

short-circuiting.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended Use

The power tool is intended for cutting threaded rods.

Product Features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1)

Front view

(2)

Moving holder

(3)

Cutting jaw (2 x)

(4)

Stationary holder

(5)

Threaded rod guide

(6)

Rechargeable battery

(7)

Battery release button

(8)

Hex key

(9)

Button for adjusting the depth stop

(10)

Depth stop

(11)

Depth stop reference surface

(12)

Supporting surface (3 x)

(13)

Selector switch (cutting, locked, opening)

(14)

Release switch

(15)

Utility hook

(16)

Worklight

(17)

Handle (insulated gripping surface)

(18)

Screws for cutting jaws (2 x)

(19)

Cutting line

(20)

Threaded rod

(21)

Attachment area for the fall protection system on

the power tool

(22)

Fall protection system

(23)

Fall protection system anchorage point fixer

This accessory is not part of the standard scope of delivery.

Commercially available (not included in the scope of deliv-

ery)

Technical Data

Threaded rod cutters GGC 18V-12

Article number

3 601 JM8 0..

Rated voltage V= 18

Cutting capacity

– Soft steel M 6 x 1

M 8 x 1.25

M 10 x 1.5

M 12 x 1.75

– Stainless steel M 6 x 1

M 8 x 1.25

M 10 x 1.5

Dimensions (LxWxH) mm 221x133x272

Weight

kg 3.4

Recommended ambient tem-

perature during charging

°C 0to+35

Bosch Power Tools 1 609 92A A3L | (17.03.2025)

/ 267

Bekijk gratis de handleiding van Bosch GGC 18V-12 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.