Bosch GCL 12V-50-22 CG Professional handleiding

Niet gecategoriseerd

Bosch

717 pagina's

PDF beschikbaar

Handleiding

/ 717

Je bekijkt pagina 44 van 717

44 | English

Working with Automatic Levelling

Position the measuring tool on a level, firm surface or attach it to the rotating mount(18)

or the tripod(27).

The automatic levelling function automatically compensates irregularities within the self-

levelling range of ±4°. Once the laser beam is permanently lit, the measuring tool has lev-

elled in.

If automatic levelling is not possible, e.g. because the surface on which the measuring

tool stands deviates by more than 4° from the horizontal plane, the laser lines will initially

flash quickly for 2seconds, then quickly flash every 5seconds several times. The meas-

uring tool is in the incline function.

For additional work with automatic levelling, set up the measuring tool so that it is hori-

zontal and wait for the self-levelling procedure to complete. As soon as the measuring

tool is within the self-levelling range of ±4°, the laser beams will light up continuously.

In case of ground vibrations or position changes during operation, the measuring tool is

automatically levelled again. Upon levelling, check the position of the laser beams with

regard to the reference points to avoid errors arising from a change in the measuring

tool's position.

Working with the Incline Function

Place the measuring tool on an inclined surface. When working with the incline function,

the laser lines will initially flash quickly for 2seconds, then quickly flash every 5seconds

several times.

In the incline function, the laser lines are no longer levelled and no longer necessarily run

perpendicular to one another.

Remote control via the Bosch Levelling Remote App

The measuring tool is equipped with a Bluetooth® module which uses radio technology to

enable remote control via a smartphone with a Bluetooth® interface.

The Bosch Levelling Remote App application (app) is required to use this function. You

can download this in the app store for your terminal device (Apple App Store, Google

Play Store).

Information about system requirements for a Bluetooth® connection can be found on the

Bosch website at www.bosch-pt.com.

When remote controlling via Bluetooth®, poor reception conditions can cause time

delays between the mobile terminal device and the measuring tool.

Establishing/Ending a Connection to a Mobile Device

After the measuring tool has been switched on, the Bluetooth® function is always

switched off.

1 609 92A 9B1 | (14.08.2024) Bosch Power Tools

/ 717

Bekijk gratis de handleiding van Bosch GCL 12V-50-22 CG Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.