Bosch GCL 12V-50-22 CG Professional Handleiding (717 Pagina's)

Handleiding

/ 717

Je bekijkt pagina 43 van 717

English | 43

Automatic shut-off

If no button on the measuring tool is pressed for approx. 120min, the measuring tool will

automatically switch itself off to preserve battery life.

To switch the measuring tool back on after it has been automatically switched off, you

can either slide the on/off switch(4) to the OFF position first and then switch the meas-

uring tool back on, or press the laser operating mode button(3).

To deactivate the automatic shut-off function, hold down the laser mode button (3) for at

least 3s (with the measuring tool switched on). If the automatic shut-off function is deac-

tivated, the laser beams will flash briefly as confirmation.

To activate the automatic shut-off function, switch the measuring tool off and on again.

Operating Modes

The measuring tool has several operating modes, which you can switch between at any

time:

– Cross-line and point mode: The measuring tool generates a horizontal and a vertical

laser line as well as two vertical laser points, one facing up, the other down. The laser

lines cross at a 90° angle.

– Horizontal line mode: The measuring tool generates a horizontal laser line in front of

it.

– Vertical line mode: The measuring tool generates a vertical laser line in front of it.

Positioning the measuring tool in the room displays the vertical laser line on the ceil-

ing beyond the top laser point.

If the measuring tool is positioned directly against a wall, the vertical laser line almost

encircles the entire space (360° line).

– Point mode: The measuring tool generates two vertical laser points, one facing up,

the other down.

To change the operating mode, press the button for laser operating mode(3) as often as

required until the laser beams are generated in the required operating mode.

All operating modes can be used with both automatic levelling and the incline function.

All operating modes are suitable for operation with the laser receiver(26).

Automatic Levelling

The measuring tool monitors the position at all times during operation. It works with

automatic levelling during set-up within the self-levelling range of ±4°. Outside of the

self-levelling range, it will automatically switch to the incline function.

Bosch Power Tools 1 609 92A 9B1 | (14.08.2024)

/ 717

Bekijk gratis de handleiding van Bosch GCL 12V-50-22 CG Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.