Bosch GCL 12V-50-22 CG Professional Handleiding (717 Pagina's)

Handleiding

/ 717

Je bekijkt pagina 42 van 717

42 | English

If the rechargeable battery/non-rechargeable batteries are empty, the laser lines and the

battery charge indicator(1) will flash one last time before the measuring tool switches

off.

Operation

Starting Operation

u Protect the measuring tool from moisture and direct sunlight.

u Do not expose the measuring tool to any extreme temperatures or fluctuations in

temperature. For example, do not leave it in a car for extended periods of time. If it

has been subjected to significant fluctuations in temperature, first allow the measur-

ing tool to adjust to the ambient temperature and then always carry out an accuracy

check before continuing work (see "Accuracy Check of the Measuring Tool",

page46).

The precision of the measuring tool may be compromised if exposed to extreme tem-

peratures or fluctuations in temperature.

u Avoid substantial knocks to the measuring tool and avoid dropping it. Always

carry out an accuracy check before continuing work if the measuring tool has been

subjected to severe external influences (see "Accuracy Check of the Measuring Tool",

page46).

u Switch the measuring tool off when transporting it. The pendulum unit is locked

when the tool is switched off, as it can otherwise be damaged by big movements.

Switching On/Off

To switch on the measuring tool, slide the on/off switch (4) to the ON position. As soon

as it is switched on, the measuring tool emits laser beams from the outlet apertures (5).

u Do not direct the laser beam at persons or animals and do not stare into the laser

beam yourself (even from a distance).

To switch off the measuring tool, slide the on/off switch (4) to the OFF position. The

pendulum unit is locked when the tool is switched off.

u Never leave the measuring tool unattended when switched on, and ensure the

measuring tool is switched off after use. Others may be blinded by the laser beam.

If the temperature of the measuring tool is approaching the maximum permissible oper-

ating temperature, the laser lines will gradually become dimmer.

If the maximum permitted operating temperature is exceeded, the laser lines will flash

rapidly before the measuring tool switches off. Once it has cooled down, the measuring

tool is operational again and can be switched back on.

1 609 92A 9B1 | (14.08.2024) Bosch Power Tools

/ 717

Bekijk gratis de handleiding van Bosch GCL 12V-50-22 CG Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.