Bosch GCL 12V-50-22 CG Professional handleiding

Niet gecategoriseerd

Bosch

717 pagina's

PDF beschikbaar

Handleiding

/ 717

Je bekijkt pagina 45 van 717

English | 45

To switch on the Bluetooth® function for remote control:

– Briefly press the Bluetooth®button(2). The button will slowly flash to provide con-

firmation.

– If the measuring tool has already been connected to a mobile device and this mobile

device is within range (with the Bluetooth® interface activated), the connection to this

mobile device is automatically re-established. The connection is successfully estab-

lished as soon as the Bluetooth®button(2) lights up continuously.

The Bluetooth® connection may be interrupted if the distance between the measuring

tool and the mobile device is too great or is blocked, and if there are any sources of elec-

tromagnetic interference. Should this occur, the Bluetooth® button(2) will flash.

To establish a new connection (first-time connection or connection to another mobile

device):

– Ensure that the Bluetooth® interface is activated on the mobile device and that

Bluetooth® is activated on the measuring tool.

– Load theBosch Levelling Remote App. If multiple active measuring tools are found,

select the appropriate measuring tool.

– Press and hold the Bluetooth®button(2) on the measuring tool until the button be-

gins rapidly flashing.

– Confirm the connection on your mobile device.

– The connection is successfully established as soon as theBluetooth®button(2) lights

up continuously.

– If it is not possible to make a connection, theBluetooth®button(2) continues to flash

rapidly.

To switch off the Bluetooth® function:

Briefly press the Bluetooth®button(2) so that its light goes out or switch off the measur-

ing tool.

Resetting to Factory Settings:

– When you reset the device to factory settings, all of the connection data in the meas-

uring tool will be deleted.

– If the measuring tool has already been connected to a mobile device and this mobile

device is within range, either switch off the Bluetooth® function or delete the connec-

tion to the measuring tool on the end device.

– Switch on the measuring tool. Then, briefly press theBluetooth® button(2) on the

measuring tool. The button will slowly flash to provide confirmation.

– Then press theBluetooth® button(2) and the laser operating mode button(3) next to

it simultaneously for 3s until theBluetooth® button(2) lights up briefly and goes out

again.

Bosch Power Tools 1 609 92A 9B1 | (14.08.2024)

/ 717

Bekijk gratis de handleiding van Bosch GCL 12V-50-22 CG Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.