Bora MS 140 handleiding
Handleiding
Je bekijkt pagina 33 van 40
79
Installation
www.bora.com
EN
X Using ten silver 4 x 16, TX20 screws (included in
the scope of delivery), screw the unit front [1] to
the front support [3].
X To do this, use the 10 screw guides [2] on the
front support [3].
X Check the length of the screws before you start.
If necessary, replace them with shorter screws of
the same kind.
Fitting the front support
Fig. 9.13 Fitting the front support
X Slide the front support and front onto the lugs
from above.
Removing the front support
Fig. 9.11 Removing the front support
X Open the drawer.
X Remove the two screws on the left and right-hand
side of the front support.
X Push the front support and unit front up until it
can be removed from the retaining lugs.
Securing the unit front
2
1
3
10x
Fig. 9.12 Securing the unit front
[1] Unit front
[2] Screw guides (x 10)
[3] Front support
Bekijk gratis de handleiding van Bora MS 140, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | MS 140 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4589 MB |