Bora MS 140 handleiding
Handleiding
Je bekijkt pagina 31 van 40
77
Installation
www.bora.com
EN
X Position the mounting angle [2] in the unit [1] with
the help of the installation jig [3].
O
The mounting angle [2] must be surface mounted
on the construction base [5]
X Select 2 suitable screw holes [4] on the mounting
angle [2].
X Screw the mounting angle [2] into place with two
silver 4 x 16, TX20 screws (included in the scope
of delivery).
X Repeat these steps on the other side with the
second mounting angle.
Connecting the connection cables to the
appliance
i
When installing the appliance, please note
that the connection cables will need to be
connected to the appliance before installation
as the back of the appliance will no longer be
accessible once installed (single installation).
i
However, the appliance must not be
connected to the mains before installation is
complete.
X Connect the mains supply cable to the back of
the appliance.
X Where applicable, connect the communication
cable to the back of the appliance (only if used
with the BORAXBO steam oven).
X Do not connect the appliance to the mains.
12
Fig. 9.7 Using the installation jig
[1] Installation jig
[2] Mounting angle
X Select the appropriate installation position.
X Slot the installation jig onto the mounting angle.
Attaching the mounting angle
1
3
4
2
5
Fig. 9.8 Attaching the mounting angle
[1] Unit
[2] Mounting angle (1 x right, 1 x left)
[3] Installation jig
[4] Screw hole
[5] Construction base
X Attach the installation jig [3] and mounting angle
[2] to the unit [1].
Bekijk gratis de handleiding van Bora MS 140, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | MS 140 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4589 MB |