Handleiding
Je bekijkt pagina 30 van 36
30
•
Do not set the temperature colder than necessary.
• Allow hot food to cool down completely before
storage.
• Defrost the appliance regularly (depending on the
model) to avoid ice formation and increase energy
consumption.
• Only open the appliance door for as short a time
as necessary to minimize loss of cold.
• Ensure that the door seal is intact so that the door
closes completely and tightly.
Cleaning and maintenance
WARNING:
• Before cleaning and maintenance work, the appli-
ance must be switched off completely and dis-
connected from the power supply.
• Never use steam cleaning equipment. Moisture
can penetrate electrical components and cause
electric shocks. Plastic parts can be damaged by
hot steam.
• Make sure that the appliance is completely dry
before switching it on again.
CAUTION:
•
Do not use wire brushes, metal sponges or other
abrasive cleaning tools, surfaces can be damaged.
• Do not use any aggressive or abrasive cleaning
agents, the coating or sensitive parts may be
scratched or destroyed.
• Do not damage the refrigerant circuit.
Cleaning the appliance including interior
To keep dirt and germs at bay, clean the appliance
regularly!
• First clear out the contents of the appliance and
store it in a cool place. Remove all moving parts
such as shelves or drawers.
• Clean the interior of the appliance, the exterior
surfaces and the accessories with lukewarm wa-
ter and a mild cleaning agent; or with a clean,
damp microfiber cloth without cleaning agent.
• For stainless-steel surfaces (depending on the
model), use a special stainless steel cleaning
agent to remove fingerprints and stains. Wipe in
the direction of the stainless-steel structure to
avoid scratches.
• After everything has dried thoroughly, you can put
the appliance back into operation.
• Depending on the model, you should remove the
dust on the back of the appliance and on the con-
denser (metal grille) at least once a year. Use a
soft brush or a vacuum cleaner to do this.
Cleaning / replacing the door seal
Regularly check the seal for dirt, damage and air
tightness!
Checking the seal for air tightness
• Clamp a thin piece of paper at various points for
testing. The paper must be equally difficult to pull
through at all points.
Cleaning the gasket
• Clean the gasket with clear water only!
• CAUTION, grease and oil make the seal porous
and brittle. Wipe up grease or oil immediately with
a damp, clean cloth.
Replacing the seal
• Remove the contents of the appliance and, if
necessary, defrost the unit. Pay attention to how
the old gasket is attached. Most gaskets are only
plugged in.
• Remove the worn gasket rubber by removing it
from the groove. Carefully clean the appliance
door and the groove below the rubber and re-
move any adhesive residue.
• Attach the new rubber. If necessary, heat the
rubber seal with a hair dryer or hot water and
shape it by hand. Start pressing the gasket in one
Bekijk gratis de handleiding van Bomann GS 7366, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bomann |
| Model | GS 7366 |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 3816 MB |
