Bogen Nyquist NQ-IPHRN01 handleiding
Handleiding
Je bekijkt pagina 4 van 7
Installation Diagram
A. Drill three mounting holes suitable for M10 screws and wall anchors
on the wall first, and the distance between the holes is 1.97" (50mm).
Then install the M10 wall anchors.
B. Align the holes on the product backet with the pre-drilled holes on the
wall and secure in place using the M10 screws and washers.
1.97 1.97
D. Power on the device. If it works normally, the installation is complete.
C. Then adjust the required angle of the loudspeaker. Tighten the bolts
holding the bracket to the horn as necessary to keep it in place.
Record the MAC address for
each IP Horn location. The
MAC address is used by the
system to identify the device
when configuring the IP Horn.
Bekijk gratis de handleiding van Bogen Nyquist NQ-IPHRN01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bogen |
| Model | Nyquist NQ-IPHRN01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 640 MB |
