Blustream HDBaseT HMX44-18G-KIT handleiding

Niet gecategoriseerd

Blustream

8 pagina's

PDF beschikbaar

Handleiding

HMX44-18G-KIT QUICK REFERENCE GUIDE

Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk

4x4 4K HDBaseT

ARC Matrix

Supporting Uncompressed 4K 60Hz 4:4:4

Web-GUI Control

The HMX44-18G features an in-built web-GUI which can be used for control and configuration of the Matrix. By default the matrix is

set to DHCP, however if a DHCP server (eg: network router) is not installed, the matrix IP address will revert to the below details:

Default Username is: blustream Default Password is: @Bls1234 Default IP Address is: 192.168.0.200

For further information please see the HMX44-18G User Manual - available to download from the Blustream website.

RS-232 Configuration

The RS-232 port is used for configuration and control of the product, as well as pass-through of RS-232 commands to the supplied

Blustream HDBaseT™ receivers.

The default RS-232 communication settings are:

Baud Rate: 57600

Data Bit: 8

Stop Bit: 1

Parity Bit: none

For a complete RS-232 command list please see the HMX44-18G User Manual - available to download from the Blustream website.

EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data is used by

the source to find out what audio and video resolutions are supported by the display then from this information the source will

discover what the best audio and video resolutions that need to be output.

While the objective of EDID is to make connecting a digital display to a source a simple plug and play procedure, issues do arise

when multiple displays or video matrix switching is introduced because of the increased number of variables.

By pre-determining the video resolution and audio format of the source and display device you can reduce the time need for EDID

handshaking thus making switching quicker, and more reliable.

Configuration of Matrix EDID settings can be acheived in one of three ways:

1 Using Matrix web browser interface

2 Using Matrix front panel (see below)

3 Using Matrix EDID DIP switches (see product User Manual)

To change the input signal type using the Matrix front panel press the following:

Using Matrix Front Panel Buttons:

a. Press the MENU button

b. Scroll down to ‘EDID Management’. Press the SELECT button to enter into EDID configuration mode

c. Scroll through EDID management options and select ‘Built-In EDID’ or ‘Copy Output xx’

Built-IN EDID Selection:

d. Select the input you wish to fix the EDID on (1-4) or select ‘All’. Use UP/DOWN buttons to toggle the selection and press

the SELECT button to move to EDID selection

d. Select video resolution + audio format required (4K, 1080p, 3D, 2ch, 5.1 etc). Use the UP/DOWN buttons to toggle the

selection and press the SELECT button to apply. The SELECT button LED will flash orange when complete

Copy Output EDID:

e. Select the HDBaseT

™ output you wish to copy the EDID from. Use the UP/DOWN buttons to toggle the selection and

press the SELECT button to move to the input selection that you wish to copy the EDID to

f. Select the HDMI input (1-4) or select ‘All’ to copy to all HDMI inputs. Press the SELECT button to apply

EDID Control

Bekijk gratis de handleiding van Blustream HDBaseT HMX44-18G-KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.