BlueBuilt BBRVMSW01 handleiding
Handleiding
Je bekijkt pagina 13 van 64
24 25
4. USE
4.1
SETTING THE THERMOSTAT
e display shows the temperature detected by the temperature sensor.
If the temperature sensor is not connected or is damaged, the display
shows 00.
e default setting of the fan is that the fan switches on at a radiator
temperature of 30°C and switches off at a temperature below 29°C.
To change these settings, follow the steps below:
4.1.1
SETTING THE ACTIVATION TEMPERATURE
Press and hold the left button (ON/+°C) for three seconds. e
temperature on the display screen flashes. A higher activation
temperature can be selected using the left button (ON/+°C). A lower
temperature can be set using the right button (OFF/-°C).
If the buttons are not operated for three seconds, the setting is saved and
the current radiator temperature is shown on the display.
4.1.2
SETTING THE DEACTIVATION
TEMPERATURE
Press and hold the right button (OFF/-°C) for three seconds. e
temperature on the display screen flashes. A higher deactivation
temperature can be selected with the left button (ON/+°C). A lower
temperature can be set using the right button (OFF/-°C). If the buttons
are not operated for three seconds, the setting is saved and the current
radiator temperature is shown on the display.
5. CLEANING AND MAINTENANCE
5.1
IMPORTANT INFORMATION
• Carry out cleaning and maintenance as indicated. is extends the
life of the appliance and will keep it working properly.
• RISK OF ELECTRIC SHOCK! Remove the mains plug from the socket.
Ensure that the plug is not accidentally plugged into the socket
during the activities.
• RISK OF BURNS! Wait until all hot parts of the appliance have cooled
down before starting cleaning and maintenance.
• WARNING! Never spray the appliance and make sure no water gets
into it. Never use aggressive cleaning agents, white spirit, detergents,
impregnated wipes or other cleaning solutions. ese may damage
the housing and appliance.
• Cleaning and user maintenance must not be carried out by children
without supervision.
5.2
CLEANING THE HOUSING
To clean the housing:
1. Remove the mains plug from the socket.
2. Use a soft damp cloth to wipe the housing.
3. en wipe the appliance dry with a soft cloth.
EN
EN
Bekijk gratis de handleiding van BlueBuilt BBRVMSW01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BlueBuilt |
| Model | BBRVMSW01 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4744 MB |